BrianS Posted February 24, 2020 Report Posted February 24, 2020 I have my MBHP CORE V3, together with 4 DIN and 4 DOUT boards. I am assuming all 8 of these boards will connect to the same port on the MBHP CORE V3 board. So am I correct in thinking I can use a single y-cable, and connect 4 DIN and 4 DOUT boaards in a cascading fashoin, and connecting the middle of the Y-cable to the CORE. I intend connecting 128 LED's and 128 momentary switches to the boards. What I do not understand is how will I know in which order to place the DIN boards, as well as the DOUT boards, because to me they all look identical. Am I missing something obvious? The boards were built for me by a friend. Please advise. Quote
Phatline Posted February 24, 2020 Report Posted February 24, 2020 dont matter, the dout or din - line is looped thru the boards... but i think its better to put the din boards at the beginning of the chain, because they are more sensibel - they are sensing... Quote
BrianS Posted March 11, 2020 Author Report Posted March 11, 2020 Thank you Phatline for this answer. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.