Polykobol Posted January 22, 2022 Report Share Posted January 22, 2022 (edited) Dear all, I first wish you all an happy new year and a lot of creativity for this year. I did a long DIY and music pause due to professional reason. I have few Sequencer V4 and some Core are damaged. I think that the Midiphy solution is amazing but as I already have panels, cases, VFD Displays, and control surface I would prefer to continu to use them. Another reason, I prefer to have a small unit than a monster device. In this way as well, I would re-use theses tools and instruments and it would still be possible in future to upgrade to the Midiphy solution. But to send directly to the trash devices is to my taste not acceptable. If I would buy the following Midify PCBs, would it be possible to run the Sequencer based on Wilba control panel with these boards? 1) PCB Core2) SD PCB3) MIDI 8 PCB4) I2C PCB5) Line TX PCB6) Line RX PCB Thanks, F Edited January 22, 2022 by Polykobol Quote Link to comment Share on other sites More sharing options...
Phatline Posted January 22, 2022 Report Share Posted January 22, 2022 show me the connection panel of the device - so i see for what Core - Line-Trans it is build for... Quote Link to comment Share on other sites More sharing options...
Polykobol Posted January 22, 2022 Author Report Share Posted January 22, 2022 You can find it under: Trace: • wilba_mb_seq_construction_guide Quote Link to comment Share on other sites More sharing options...
Phatline Posted January 22, 2022 Report Share Posted January 22, 2022 nope i cant find it - this is only the frontpanel. i need too see your backpanel - aka the housing aka the aluminium plate for the connections... - about software: there is still a firmware for 4.096 so yes possible... Quote Link to comment Share on other sites More sharing options...
Polykobol Posted January 22, 2022 Author Report Share Posted January 22, 2022 Everything is detailed under UCAPPS MIDIbox SEQ V4 Quote Link to comment Share on other sites More sharing options...
Polykobol Posted January 22, 2022 Author Report Share Posted January 22, 2022 (edited) http://wiki.midibox.org/doku.php?id=mididocs:seq:beginners_guide:start http://ucapps.de/midibox_seq_manual_in.html But I don't know if this is compatible with the Midiphy Core. Edited January 22, 2022 by Polykobol Quote Link to comment Share on other sites More sharing options...
Polykobol Posted January 22, 2022 Author Report Share Posted January 22, 2022 By the way, I have the feeling that's exactly the panel that you have according to that link: Quote Link to comment Share on other sites More sharing options...
Phatline Posted January 22, 2022 Report Share Posted January 22, 2022 (edited) nope that is a plastic case made by ponoko... so why you dont post the panel - else i am out! why you want to use the midiphy core? use the orginal core? I ask because i have booth at home the lpc17 core (need different packbanel) the stm32F4 core '(need different backpanel)... the orginal stm32F4 core use the same microcontroller on a different developement board - like the waveshare from midiphy... ... i too have the linedriver pcb... i have a whole midibox labor with assembled modules at home - but if you wont show the backpanel - i cant help you anyway... Edited January 22, 2022 by Phatline Quote Link to comment Share on other sites More sharing options...
Polykobol Posted January 22, 2022 Author Report Share Posted January 22, 2022 Quote Link to comment Share on other sites More sharing options...
Phatline Posted January 22, 2022 Report Share Posted January 22, 2022 tirol... oberösterreich - ok englisch ist nicht dein ding - guad ich will doch nur die Anschlussblende sehen aka Backpanel diese Rückansicht z.B. ist für ein core stm32F4... und ist offensichtlich für 2x Midi IO Module geschaffen für diese ausführung hätte ich alles daheim, bis auf das zweite MIDI IO... Quote Link to comment Share on other sites More sharing options...
Polykobol Posted January 22, 2022 Author Report Share Posted January 22, 2022 Well, I work using English since 1995. I don't have any back Panel on this one. On the silver one I have a side Panel, but it is not here right now. I want to get the maximal Midi port amount as possible. I would like to update as well with the the CV/Gate directly but for the beginning, it is not a must. SD port on the back as well. Sync Roland for old drum/Sequencers. Isn't it possible to use the midi8 PCBs from Midiphy? https://www.midiphy.com/en/shop-details/138/7/midi8-pcb- Quote Link to comment Share on other sites More sharing options...
Polykobol Posted January 22, 2022 Author Report Share Posted January 22, 2022 (edited) On this one, it is simply the STM32 midi ports. No additional PCBs. Edited January 22, 2022 by Polykobol Quote Link to comment Share on other sites More sharing options...
Phatline Posted January 22, 2022 Report Share Posted January 22, 2022 ok kenn mich aus... das panel wird erst entworfen natürlich möglich ist so wie ich das sehe ist das einfach ein http://www.ucapps.de/mbhp_midi_io.html nur halt 2 auf einer platine die line driver von midiphy kannst auch verwenden (obwohl ich einen da hätte den ich nicht mehr brauche - weil ich zwei habe) vom midiphy core her weis i ned- müsste pin compatibel zum Discovery Board sein. - aber das orginal könntest auch von mir haben. http://www.ucapps.de/mbhp_core_stm32f4.html da wäre halt sd slot und usb gleich auf einem board... musst selber nachmessen was von der größe her eher in dein Wunschgehäuse und Anschluss Panel passt. @ gate: direkt aus dem gehäuse... ja entweder via Linedriver für extern - oder via DINX4 intern http://www.ucapps.de/mbhp_din.html oder du baust dir https://www.midiphy.com/en/shop-details/121/50/seq-v4-eurorack-modules-essential-kit-midiphy-seq-v4-eurorack-modular-midi-cv-interface direkt ins gehäuse. für CV eben auch das midiphy module, oder halt. http://www.midibox.org/dokuwiki/aout_ng und dann verkabeln zu buchsen ihrgendwo im gehäuse (da hät ich was daheim falls die auflösung für dich reicht) in beiden fällen brauchst halt dann im sequencer die +-12V um das CV von 3V raufzuskalieren zu verwendbaren werten... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.