Jump to content

one-peice PCB issue -->


Recommended Posts

Posted

Hi...

Just saw Mega MIDIbox (jaw on floor again) diagram and am wondering if i could put all modules on one pcb - the enclosure unit would be pretty large so i guess the wires from the AINs to some of the pots could be quite a length - is there a limit to the length of wire...

Prolly, another basic EE q - but, again, i'm new ;)

Peace...

Dan

Posted

...also...

what solder/flux is recommended? can i use flux-cored solder wire instead of doin it sep...? do i have to use a diff solder for SM components...?

Thanks...!

Posted

Best experiences have been made with seperated AIN modules which are as close to the pots as possible (see also the pictures at the bottom of http://www.ucapps.de/mbhp_ain.html). All other modules can be combined to one PCB without any risk of unstable signals.

You could also try to create a AIN board which allows you to mount the pots - this saves effort, but requires some experiences in layouting a PCB.

Best Regards, Thorsten.

P.S.: I hope that somebody else can provide some good links to soldering guides...

Posted

Was thinking about a ain board like the one thorsten mentioned a while ago.... Even got to the point of laying one out....

The concept i came up with allowed all boards to be 'daisy chained' with a single idc ribben cable Might finish this off sometime soon, and post a link to the pcb files???!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...