Twin-X Posted June 4, 2004 Report Share Posted June 4, 2004 If i have completed my quad sid how can i or must i :A: update the mios or sid software? Do they go all at once? Or must i flash them seperatly (stuff unstuff).B: change midi chanel for each sid (or do i have only 1 midichannel?) trough control surface.Thx in advance Quote Link to comment Share on other sites More sharing options...
TK. Posted June 4, 2004 Report Share Posted June 4, 2004 Hi Twin-X,there is a new description which describes the required steps:http://www.ucapps.de/midibox_sid_csB.html(search for "Preparation of PIC18F cores")Once this has been done, you can change the MIDIchannel of each SID (seperately of course...) in the CFG menuBest Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Twin-X Posted June 5, 2004 Author Report Share Posted June 5, 2004 Preparation of PIC18F coresStep by step:I read this over and over and over :DDo i stuff all cores at once. Power the unit.Use the link cable of JDM to prepare the master and finish it all. After testing sid 1 i connect this cable to slaves 1 by 1? And repeat the procedure (according to the steps in the step by step guide)Sorry if i sound confusingp.s. the cores j10 only have 4 wires connected right? Quote Link to comment Share on other sites More sharing options...
TK. Posted June 5, 2004 Report Share Posted June 5, 2004 Hi,are these questions or conclusions? ;-) Of course, if you haven't programmed the bootloader into the slaves, it's time to do it now. And please don't forget to set the ID of the slaves to 1, 2 and 3!J10 has 4 connections if the ground is already connected from the power supply unit to the SID module --- compare the wiring with http://www.ucapps.de/mbhp/mbhp_4xsid_c64_psu_optimized.pdfBest Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Twin-X Posted June 5, 2004 Author Report Share Posted June 5, 2004 Thanks for the info.Regards,Jeffry Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.