Twin-X Posted August 25, 2004 Report Share Posted August 25, 2004 Hello,I am testing my quad sid but after mios and sid_cs upload i get a normal display.Now no led burns and the only button that works is the control 1 button. It chages the display.no rotary no led no button works ????What have i done wrong? Quote Link to comment Share on other sites More sharing options...
pay_c Posted August 25, 2004 Report Share Posted August 25, 2004 Have you enabled the Control Surface within the Seq App.?Not that you have an old version of you SID App. and therefore no support for the CS. You need to put it on in the main.asm.Good luck & Greetz! Quote Link to comment Share on other sites More sharing options...
Twin-X Posted August 25, 2004 Author Report Share Posted August 25, 2004 pay_c i do not really understand what you mean.I have loaded bootstrap with JDM1. Installed Mios_v1.72. Installed SID_V1.6_with_csHow do i enable the control surface? I have not used a seq app yet. Quote Link to comment Share on other sites More sharing options...
pay_c Posted August 25, 2004 Report Share Posted August 25, 2004 Argh! Oooops... mistyped, meant SID not Seq! Sorry! :-XOk. So your DIN and DOUT does get everything right? (Check voltages e.g.)Do some LEDs come up shortly when you switch on?Anyhow: Check your main.asm file from your SID_with_CS App. if everything´s fine.Good luck again! ;D Quote Link to comment Share on other sites More sharing options...
Twin-X Posted August 25, 2004 Author Report Share Posted August 25, 2004 CS is enabled (the lcd says it in a flash)the asm file is ok.All voltages of din and dout are ok.Any more options please :( Quote Link to comment Share on other sites More sharing options...
Twin-X Posted August 26, 2004 Author Report Share Posted August 26, 2004 PLease help. Still only the control 1 button is working. Quote Link to comment Share on other sites More sharing options...
pay_c Posted August 26, 2004 Report Share Posted August 26, 2004 Sorry to say this, but:Disconnect all your stuff from the core (except LCD, LTC and all that stuff that already works) and put it there one after the other. Start only with DOUT 1 and check all your voltages and so on (and also the other Pins - check if it gets it´s signals). The same with DIN and so on.Kinda work, I know, but in the moment the only option I know... :P Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.