intosite Posted October 11, 2004 Report Share Posted October 11, 2004 Hi,My project requires only 6 analog multiplexers. I've got the AINX boards from SmashTV which are based on the MBHP_AINX4_V2 module design.As i have only need for 44 pots/faders, only 6 4051 meltiplexers is needed to plug in to the sockets right?Am wondering how do i ground the rest of the 2 unused sockets. Do i need to clamp every one of the extra j3 and j4?BTW what's a LFO for and what does it do as talked about at http://www.ucapps.de/midibox_ext.html.Regards Quote Link to comment Share on other sites More sharing options...
Screaming_Rabbit Posted October 11, 2004 Report Share Posted October 11, 2004 LFO = Low Frequency OscillatorGreets, Roger Quote Link to comment Share on other sites More sharing options...
goyousalukis Posted October 11, 2004 Report Share Posted October 11, 2004 Just connect A2 and A3 on the second AIN to ground. This will prevent the random midi events.A LFO is a Low Frequency Oscillator. In that example, the oscilator(s) are connected to a pin on the ain module. The LFO sends a voltage from 0 to 5 and then back down at a speed(frequency) set by a Pot. The Midibox reads this and converts it to a CC Message(0-127) just as if you were turning a knob at a regulated speed.Hope this helps.Justin Quote Link to comment Share on other sites More sharing options...
intosite Posted October 11, 2004 Author Report Share Posted October 11, 2004 Thanks :) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.