grahamg Posted January 7, 2005 Report Share Posted January 7, 2005 Despite my best efforts checking and re-checking wiring and parts, I cannot seem to get the bankstick module to work. I'm just trying to verify that it works with my core module by running the bs_xfer code in the download section. I can compile the main.hex and convert to a syx file just fine, but when I upload it to the core (either using MIDIOX or sysexbox, I get errors returned from the core). Sysexbox returns error codes 0A 00, 0A 3A, and 00 45. I have tried several different 24LC256 chips and have double and triple checked the wiring. I've also tried both MIOS 1.7 and 1.8 RC1. Help!thanks,Graham Quote Link to comment Share on other sites More sharing options...
grahamg Posted January 9, 2005 Author Report Share Posted January 9, 2005 Just to clarify: MIOS doesn't seem to even see my bankstick. The core never tries to format it and if I try to call MIOS_BANKSTICK_SetCtrl, I get an error code of 2 (bankstick not available). Has anyone had this problem? Any ideas for what could be causing it?Thanks,Graham Quote Link to comment Share on other sites More sharing options...
Stigmata Posted January 9, 2005 Report Share Posted January 9, 2005 Just a thought...Are you shure that the J4 SC (on the core) goes to the pin #28 and not Pin #22 (for the old 16f)Christoffer Quote Link to comment Share on other sites More sharing options...
grahamg Posted January 10, 2005 Author Report Share Posted January 10, 2005 Stigmata,That was exactly the problem. Thank you so much!! I was under the impression that the core module was completely compatible with both the 16f and 18f pics. Didn't realize that there were these subtle differences.Again thank you!-Grahamps. is this difference documented somewhere on the site? Quote Link to comment Share on other sites More sharing options...
smashtv Posted January 10, 2005 Report Share Posted January 10, 2005 ps. is this difference documented somewhere on the site?http://www.ucapps.de/mios_v1_7_hardware_mods.htmlBest!Smash Quote Link to comment Share on other sites More sharing options...
moebius Posted January 10, 2005 Report Share Posted January 10, 2005 This modification was introduced in MIOS release 1.7.. and the link Smash posted is also featured in MIOS -> Download page, in description section for the MIOS 1.7.Also current core schematics ect. represent this change.Bye, Moebius Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.