Hermes Posted February 16, 2005 Report Posted February 16, 2005 Hello to everyoneI have built a single SID which I am currently using without a CS (but not for long - the front panel is ready :) )and which I control from a Dopfer Drehbank Midi Controller). Everything works fine - the sound is absolutely fantastic- except for one thing: I have connected a LCD and although it says, at first "MIOS v. 1.7 T. Klose" and right after that "MidiBoxSID v. 1.7 CS not enabled!", I cannot get it to display anything else when send midi CC from my Drehbank or from my master keyboard. The question is: Can I get my no-CS SID to display the parameters I am altering using an external controller? And if yes what must I do (must I send any special sysex string for that ?)Thanks in advance - I really want to fix that so that I can use the SID on a studio session tomorrow... ;DDimitris Quote
TK. Posted February 17, 2005 Report Posted February 17, 2005 Hi Dimitris,you can just upload the CS version to see at least the patch number/bank/name and MIDI channel. So long your core module is stuffed completely (especially the 10k pull-up at J9), it won't hurtCan I get my no-CS SID to display the parameters I am altering using an external controller?no, this is not possibleBest Regards, Thorsten. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.