rund1me Posted March 15, 2005 Report Share Posted March 15, 2005 Hello,In the search for customizable MIDI Controller i found ucapps.de. Before i searched lots of Forums and Sites and i just found de doepfer ctm and other doepfer Products, but they offer to low possibilities for a too high price.So if you could help me find the best and lowpriced possibility for my midi Controller.I need:* MIDI Out* MIDI In* 18 Fader ( motor )* 16 Velocity Buttons ( not nessecary )* 20 Buttons* 1 Modulation Wheel btw. Joggle Padgood extensions (not nessecary):* Light for Faders* MIDI To USB integratedIf you can place some links for Tutorials and Products or you have good Ideas for this, please help meAnd no i wont give up, and even if its hard and i have to learn, so please help meThanks in advanceMartin Quote Link to comment Share on other sites More sharing options...
rund1me Posted March 15, 2005 Author Report Share Posted March 15, 2005 i just want to say that i dont need any synth stuff or something, this is just uses as a controller for software in my pc.If you know where to get cheap faders and buttons, and which of them to use, will be fine if you post them here. Quote Link to comment Share on other sites More sharing options...
rund1me Posted March 15, 2005 Author Report Share Posted March 15, 2005 OK , i mentioned, i was to fast and should read a little bit more.....I Searched UCApps and i found the most things i need. But there are some questions left.I think the midibox64 is the best source for my controller.So i need :Core ModuleMIDI to USBMotorfader to Coreplease just correct me if iam wrong. what do i need for lighted faders and buttons if there active ? is there any application that uses this or support this ?an what to do ?thanks in advanceMartin Quote Link to comment Share on other sites More sharing options...
doc Posted March 20, 2005 Report Share Posted March 20, 2005 Hi,just some minor corrections:You'll need3 x CORE (because of the 18 Motor Faders. One Core can handle up to 8 Motor Fader)3 x MF Module 1 x DINX4 (for the buttons)1 x DOUX4 (for LEDs)1 x USB Module If you just use 16 Motor-Faders you'll need only 2 Cores. - or - if you use fader without motor you'll only need one Core, no MF and one AIN Module.Think about that.You'll need the DOUTX4 module to drive leds for the buttons. No idea about the lighted faders.greetsDoc Quote Link to comment Share on other sites More sharing options...
rund1me Posted March 21, 2005 Author Report Share Posted March 21, 2005 thanx Doc you helped me out.so i have a question left.what motorfaders are best and where to Order them cause i cant find the rs0aon11m froms ALPS at Conrad.at and RS-Components.at cause iam from austria.someone got experienced in that ? Quote Link to comment Share on other sites More sharing options...
doc Posted March 22, 2005 Report Share Posted March 22, 2005 Just have a look at the german formun. They are doing a order list at the moment.greetsDoc Quote Link to comment Share on other sites More sharing options...
Screaming_Rabbit Posted March 22, 2005 Report Share Posted March 22, 2005 Just have a look at the german formun. They are doing a order list at the moment.greetsDoc... when the bulk order officially starts, it will be placed in the international forum part.Thorsten ist testing some different ALPS fader-types before.Greets, Roger Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.