julien carayon Posted July 25, 2005 Report Share Posted July 25, 2005 Hello to all midiboxer! :)I'm going to build my own midi controller to...well...control my sequencer..I have Cubase VST 5 (ok I'm aware it's not up to date - please don't laugh :-[ ;D ;) )will a timecode display work with my sequencer? Can anyone give info about making a timecode display (parts, connections,...)Thank you so much :) ;) :DUP MIDBOX !!!!JCwww.juliencarayon.com Quote Link to comment Share on other sites More sharing options...
Screaming_Rabbit Posted July 25, 2005 Report Share Posted July 25, 2005 ... it's all on ucapps.de... http://www.ucapps.de/midimon.html... I have no idea about timecode midi signal-stream from cubase (not a cubase user)Greets, Roger Quote Link to comment Share on other sites More sharing options...
raphael Posted July 25, 2005 Report Share Posted July 25, 2005 have Cubase VST 5 (ok I'm aware it's not up to date - please don't laugh    )will a timecode display work with my sequencer? I don't use Cubase, but most sequencers can send MTC.Can anyone give info about making a timecode display (parts, connections,...)http://www.ucapps.de/midimon.htmlwith MTC optionhttp://www.ucapps.de/midimon/mtc_extension.pdfhttp://www.ucapps.de/mbhp/mbhp_doutx4_mtc.pdfIf you only need timecode, you can omit the LCD display.Raphael Quote Link to comment Share on other sites More sharing options...
julien carayon Posted July 26, 2005 Author Report Share Posted July 26, 2005 Hello!Thank you for helping.Cubase can actually send MTCWhich led digits to use ? (specifications,...)However I'm wondering what the "status displays" is for. I haven't found any detalied info about it ???Again thank you ;) :)JCwww.juliencarayon.com Quote Link to comment Share on other sites More sharing options...
Screaming_Rabbit Posted July 26, 2005 Report Share Posted July 26, 2005 Which led digits to use ? (specifications,...)... it's written on http://www.ucapps.de/midimon/mtc_extension.pdf, which raphael posted for you: "common anode"for example: http://www.voti.nl/shop/p/DISP-5.htmlHowever I'm wondering what the "status displays" is for. I haven't found any detalied info about it... this is for the LC applicationGreets, Roger Quote Link to comment Share on other sites More sharing options...
julien carayon Posted July 26, 2005 Author Report Share Posted July 26, 2005 Hi screaming rabbit! :)... this is for the LC applicationOk I see nowthank you ;)JCwww.juliencarayon.com Quote Link to comment Share on other sites More sharing options...
Jidis Posted July 27, 2005 Report Share Posted July 27, 2005 Julien,I've used the "LCD-less" MIDIMon for that from Nuendo. It will also detect and display regular beat clock, if that appears in the stream. You can check or uncheck them in the Cubase sync panel to turn them off.TK- If you should see this-- I don't think it does non-4/4 time signatures in beat clock mode. It's not supposed to is it?PS- Check the actual pinning of the segment modules you use. I've got two different dual digit display parts here with different pinouts. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.