renepela Posted January 17, 2006 Report Share Posted January 17, 2006 Recently I have built a midibox sid step B. It is not quite finished yet, but in the proces of finishing it I would like to built a headphone out which combines the four independent outs I have on one headphone Jack.What do i need to do to achieve this?Thanks in advance,Patrick Quote Link to comment Share on other sites More sharing options...
thefRont Posted January 17, 2006 Report Share Posted January 17, 2006 maybe this could help you:http://www.midibox.org/forum/index.php?topic=5967.msg36766#msg36766 Quote Link to comment Share on other sites More sharing options...
DrBunsen Posted January 27, 2006 Report Share Posted January 27, 2006 Maybe this too?PAIA headphone ampSmall kit, or you can look at their nice circuit diagram :)From what I read of thefRont's link, that's a line level mixer. It'll need amplifying to drive headphones. Quote Link to comment Share on other sites More sharing options...
pay_c Posted January 27, 2006 Report Share Posted January 27, 2006 I use the PAIA one here. I built it by the schematic. If you use two channels in parallel the sound quality is good, one alone is to bad in my "ears" (it´s going into distortion to early then).Greetz. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.