Jump to content

The making of a Traktor 3 controller


Wise

Recommended Posts

  • Replies 90
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

You don't **** around do you?  ;D

Hey Wise, good job. I`m glad you chose midibox over the girls.

Who said that you can't do both?  ;D But now my holiday is over so we'll see how much time I have to work on the project.

I see you have pretty much wire jumpers. Couldn`t you awoid it? It`s not it`s looks bad, they are pain in the ass to solder. I really like interconnection cables... very nice. I usually use hot melted glue for that which ig good but looks so unprofessional.Your are just great.

It's very hard to route a single layer PCB with all the shiftrgisters, buttons, leds etc without having to place a few wire jumpers if you are planing to etch it yourself. Yepp, they are a pain in the hole to solder... Thanks fore your comment on the interconnection cables, they fit perfectly on my modified SIL headers :)

How things are going with the panel? any changes from the previous design? I usually change so many things if project took longer times. Maybe you could contact MTE (Traktorizer), and integrate some of his features. He is using some cool craphic displays, and I see you have a plenty of room for them.

Glad you`re back, mate. ;)

Nothing much have changed on the frontpanel, not fabricated yet. I have seen those Nokia LCD MTE uses, looks cool. Maybe I can implement one LCD for each FX section on the front, I think that there is enough room to place them next to the FX PCB's. Have to look into that soon.

I love your wiring....its very very clean made.....cant await to see some updates of your baby

Best Regards

Thanks  8) I think I saw you had a grouporder for the nokia displays in the german part of the forum? I can't speak german, so it's just a guess, but have you any spare LCD's over? Maybe I'm interested of 3 displays.

Link to comment
Share on other sites

  • 2 months later...

Long time no PCB...

Made one this weekend. One more (the last) FX board. Nothing new apart from that this time I used a chemical tin on the PCB. Really good stuff, seach for 529338 at Conrad. This prevents the copper to oxidate. I'm happy with the results.

Obligatory pictures:

pcb_fx2.jpg

pcb_tin.jpg

Link to comment
Share on other sites

Long time... I wanted to ash here what is happening with it, but I forgot who you are and the name of this thread.  ;D

That PCB looks really nice. I`must check that chemical tin. Never heard of that.

I just solder last night these pin heathers your way which was a problem for me before as I have got no idea how to do it properly, so I was soldering it as it is, but bit angled. Your solution is good and simple.

Link to comment
Share on other sites

  • 3 weeks later...
  • 2 months later...

This project is like Bambi on ice, slowly moving forward. It's been in idle now for some month because /)%(%¤"(/¤ Vi*ta is not letting me use my CAD software. So right now i'm making some backups prior a XP install..

Your local glazier shop should have or point out for you where to look for the acrylic rod. I have abandoned the rod and got my plastic caps lasercutted instead.

Link to comment
Share on other sites

  • 2 years later...

I know, I know, old thread.. But please, don't kill me ;)

I would just like to know how it went on with this project.

Would be really nice to see if it ever got completed, or if it's still in the making.. I hope it's not thrown away into some dusty corner ;)

Link to comment
Share on other sites

Ehum...yeah..this is kind of embarrassing...

Well, the project has stand still from my last post. The good news is that it's not in the bin. I see various bits of it lying around in my hobbyroom every day.

Actually it is not so much left to do. A couple of pcb's to draw, frontpanel have to be made and some programming.

Hopefully I can get some time and motivation to finnish the project this summer.

Link to comment
Share on other sites

Wow ok, that is great news mate =)

I've watched this topic since.. well since a long time back ;) and I would really like to see you finish this.

Of course, there are lots of other projects that look awesome aswell, but I really like this one =)

I hope we all can give you some inspiration somehow to get you to finish it =)

Så sätt igång och känn dig inspirerad! ;)

** Edit, I've followed this topic quite some time, even though I only registered yesterday.

Just to make that clear, so anyone dont think I just found this and brought it up to the surface from the archives ;)

Edited by toffie
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...