Traktorizer - a Midibox to control Traktor-DJ-Studio -

[stryd_one]

One core will happily drive up to 8 of these from a single LCD port :)

[MTE]

Yeh

all 8 I will implement...3 per each Deck....2 for Master-section ;)

1 little bug I found out...when I photograph them with flash, the lcds goes clear, after poweron the screen is back  :-\

[DavidBanner]

wow!

I'm double impressed!

I've checked out your bit on the wiki, so my next question is can I grab the C to hack into my own creation?

[MTE]

Attached ;)

app_lcd.inc

readme.txt

app_lcd.inc

readme.txt

[DavidBanner]

you star! thanks very much

definately going on my box v2....

now off to (finaly) finish v1

[stryd_one]

Yeh I'm still looking for a perl programmer so I don't have to convert it manually next time... anyone?

Oh BTW, if you get the Nokia 5110 screen you can get a backlight attached :)

If anyone finds some 7110 screens to send to me I'll do the driver for those badboys too..

[Sasha]

Man, those LCDs are so great and informative. You already great controller will evolve so much when you add those dislays.

1 little bug I found out...when I photograph them with flash, the lcds goes clear, after poweron the screen is back

What a strange bug ??? What do you think what`s cosing it? Light or electrical discharge?

I hope you want need to have shade for your controller to block the strobe light when gigging.  ;D

[MTE]

Yeh its very strange bug, i tested it some times again...its only if u put the camera-flash directly 10-15 cm in front of the display....a friend telled me maybe it works like a sensor or something....dont know.

2morrow my EL-Foil will arrive :)  *jumping :)  cant await to test

Stay tuned  8)

[Sasha]

And soon, some new jog plates will arrive too. ;)

[th0mas]

Yeh I'm still looking for a perl programmer so I don't have to convert it manually next time... anyone?

Oh BTW, if you get the Nokia 5110 screen you can get a backlight attached :)

If anyone finds some 7110 screens to send to me I'll do the driver for those badboys too..

What do you need a perl programmer for stryd?  I can prolly do it.

[Sasha]

End here are new wheels...  ;)

[MTE]

Wuuuuuooooooaaaaaaaaaaaaaaaaaahhhhhhhh  :D  :D  :D  :D  :D

THNXXXXXXXXXXXXXXXXXXXXXXXXXXX Mate !!!

What a great blue colour, its the same like the EL-Foil....NICE !!!

Thnx and 1000 thnx again & again :)

[Sasha]

I`m glad you like it, and I`m sure I`ll thank you for documentation as I want to build one myself.  ;)

[MTE]

I love this foil :)

More Backlighting tests next days ;)

[MTE]

Gmorning

Here now 1st try  ;)

[Sasha]

Nice! :)

[MTE]

A hard step was gone...

:)

[stryd_one]

Woot!!

Done by hand.... :o

[Sasha]

Man, I understand now why you waited for vacation to work on it.

[goule]

Wow, amazing !  :o

I can't wait to see it finished !

Goule

[MTE]

Im in love...  :D

These Jogs are so great colour, cant await until my superbright blue leds arrive to illuminate them...

Big thnx again to Sasha who lasered this babys for me  8)

[Sasha]

You are welcome.

Looks really cool!  ;)

[MTE]

Stupid question but i cant test still this.....

can I connect an encoder on a "dissimilar" pin ?

Example :

ENC_ENTRY  1,  1,  MIOS_ENC_MODE_NON_DETENTED    ;  // Jogwheelencoder Deck A

instead of

ENC_ENTRY  1,  0,  MIOS_ENC_MODE_NON_DETENTED    ;  // Jogwheelencoder Deck A

Sorry for asking this but I must know this before I change my pintables for the DIN-soldering

[stryd_one]

Heh I've always wondered that.

I don't think it'll work across two SRs. Otherwise, as far as I can see, it should work fine... but I decided that instead of asking TK, I'd just use even numbers. Is there some compelling reason why you'd rather start from odd numbers?

Edit: Yeh it should work like in your picture.

[MTE]

Is there some compelling reason why you'd rather start from odd numbers?

not really, just a thought, cause I forgot I have some Din-Pins left so I shift 1 pin to the right and its ok.

...but this question is still interesting (for me :) )