dubka Posted June 15, 2007 Author Report Posted June 15, 2007 Are the joystick ports only on Therezin's board (and soldered together?) because he's building it into the c64 case?Martin
NorthernLightX Posted June 15, 2007 Report Posted June 15, 2007 Are the joystick ports only on Therezin's board (and soldered together?) because he's building it into the c64 case?MartinI have no idea what he uses them for, the're not in TK's design. Maybe for connecting banksticks externally.
Therezin Posted June 18, 2007 Report Posted June 18, 2007 I have no idea what he uses them for, the're not in TK's design. Maybe for connecting banksticks externally.That's correct. They're wired up for external banksticks built into DSUB9 connectors.
dubka Posted June 18, 2007 Author Report Posted June 18, 2007 How does that work then? The 2 ports only seem to be connected to one another...?Martin
NorthernLightX Posted June 18, 2007 Report Posted June 18, 2007 How does that work then? The 2 ports only seem to be connected to one another...?MartinSee the SIL header in the picture? ;)
dubka Posted June 19, 2007 Author Report Posted June 19, 2007 Nope. Nor do I know what that even means. Sorry...?
Therezin Posted June 19, 2007 Report Posted June 19, 2007 The 4-pin connection that is wired to the sockets (SIL header) will be connected to the bankstick port on the MBHP_CORE module. The sockets are both connected exactly the same way. The bankstick's ID will be set by the wiring inside the bankstick itself, either permanently or with the aid of some DIP switches.
dubka Posted June 19, 2007 Author Report Posted June 19, 2007 Oh, I see. Thank you very much for the explaination.Martin
dubka Posted June 20, 2007 Author Report Posted June 20, 2007 Am I right in thinking that the lcd at the top of the first control panel page is strapped to a dinx1 with 2 rubber bands?!Martin
NorthernLightX Posted June 20, 2007 Report Posted June 20, 2007 Am I right in thinking that the lcd at the top of the first control panel page is strapped to a dinx1 with 2 rubber bands?!MartinNo, that's not a DINX1, just some protoboard with the buttons and an encoder mounted (the actual IC is on another board, probably a DINX4). You were right about the rubber bands though ;)
Wilba Posted June 20, 2007 Report Posted June 20, 2007 Therezin: that bridge rectifier has different pinouts to the ones I've seen, where +/- are diagonally opposite. I recall another MIDIbox builder got caught by that difference and fried a transformer. Can you put a warning note or something on your website???
Therezin Posted June 20, 2007 Report Posted June 20, 2007 Therezin: that bridge rectifier has different pinouts to the ones I've seen, where +/- are diagonally opposite. I recall another MIDIbox builder got caught by that difference and fried a transformer. Can you put a warning note or something on your website???Good idea, I didn't even think about that. I'll put the warning on tonight when I've finished work.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now