Leaderboard

And Done!

So this is the result: The way this is hooked up is My SEQV4 hooked up to the Aout Euro module via D-Sub, the euro module is powered by the eurorack power and has a SRIO out connection to the TPD. 5V is generated by the Aout Euro

So I have been working the last month or so on a new surface mount based Max525 Auot module with integrated daughter board and level shifter. The level shifter if based on the Midisizer Alf analog board and is adjustable from 5 to ~11V gates. Sync24 is also included via normaled jacks so the signals are run to the DIN port on the 4xIIC module unless something is plugged into the 3.5mm on the break out board. Critiques/comments welcomed and appreciated

I did the 1/8" as well. Here is the setup before I added the level shifters: