Screaming_Rabbit
-
Posts
1,431 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by Screaming_Rabbit
-
-
I have a complete woodshop in my garage - anybody need anything? ;D
... build me some 100mm faders from ebony ;D
-
Tja, war wohl nix @ Rabbit ;D
*sorry, konnts mir net verkneifen
;D geht mir auch oft so ;) - No Prob
-
Paid for 10 Chips and PCB´s!
THX THORSTEN!
Parcel arrived, looking good :)
Thank you Thorsten
... but please don't tell now everybody that you have paid and received the package in this post... it makes reading it very unconfortable. - I think Thorsten will expect you complain, if you don't get the package.
Greets, Roger
-
Ich denke mal das es an der Verdrahtung der Encoder liegt,nur werde ich einfach nicht schlau von dem Datenblatt von Voti.
... wie wäre es, wenn Du einen Link zum Datenblatt posten würdest? - Würde das Beantworten extrem vereinfachen ;)
Grüsse, Roger
-
... so wie's aussieht, handelt es sich um einen 3200 mit einem qualitativ hochstehendem, Eisen losem Maxon-Motor.- Top Qualität!
Wenn er wirklich in einem Top Zustand ist, handelt es sich um ein super Angebot.
Nur:
1. Mit der bestehenden MF Ansteuerung wirst Du ihn kaum anständig regeln können... diese Motoren sind zu schnell für "unsere" digitale Steuerung.
2. Was willst Du mit bloss einem? Falls Du nicht wieder ein super Angebot findest, wird dich jeder zusätzlich Fader ca €90 kosten.
Greets, Roger
-
I'm in for 2.
Of course, I have no idea what this thing is, but I want one if they're 18 euros!!
... if I didn't get it wrong, for €18 you'll get 4. For your two you'll pay €10 together.
-
4 for me please. - Thanks Mike.
Greets, Roger
-
@SLP: You should fragment the forwarding gmx address in your error message copy you posted, if you don't want Thorsten to get bombed with spam. ;)
Greets, Roger
-
What must be connected to the core J9 SI signal ? 1 or 2 ?
What must be the connection between J1 and J2 for Din Chain?
see:
http://ucapps.de/mbhp/mbhp_dinx4.pdf
http://ucapps.de/mbhp/mbhp_dinx4_32buttons.pdf
Core / J9 -> DIN1 / J1
DIN1 / J2 -> DIN2 / J1
...
Greets, Roger
-
Do I mess up?
... how about a picture?
Greets, Roger
-
What's important is that they are placed closely to the PIC pins.
Like nILS writes but a bit more precise for understanding what it does: Only the Vdd side must be as close to the pin as possible, since it's intended to take out spikes or ripple out of the supply line just before the IC connection.
Greets, Roger
-
Do we know for sure that the RK25 won't work? Anyone out there who tried it?
... no, I never heard of someone trying it. But I also never heard it won't work.- The regrets existing are, that it might be too quick for the MIOS MF-implementation, similar to the K-Type linear faders. - You have to buy one and test it.
2. Does the LC app also send 10-bit messages in 'flip' mode?
... I don't think so (but TK propably can tell you this for shure). I think the controller switches internally, so the host doesn't know, that the control elements are interchanged.
I *thought* when I looked around at them, there were certain ones that were only a few dollars a piece, but I could have been looking at something totally incompatible.
I know the ones you're talking about (I even have some of those... mine are 20k, but never tried them out). They are built like for HiFi Amps level control and such stuff and are way too slow for an application with SnapShots.
Greets, Roger
-
-
I've measured the pots and I'm getting 11.31 as the maximum resistance so I guess these are fairly inaccurate 10 ohm. Should these work okay?
... I think you made a typo. - They should be 10 k-ohm. You should also check if they are linear and not log. Turn the pot to the middle position and check if you measure approx. 5k
Greets, Roger
-
... might be an alive/acknowledge message. Does the host give a respond? Or is it in respond to a host message?
Greets, Roger
-
I don't expect you'd still have any of these left, tilted (or anyone else) by any chance?
sm
???
... looks to me they're still available at pollin.
http://www.pollin.de/shop/shop.php?cf=detail.php&pg=OA==&a=Nzg1OTk2OTk=&w=ODkzOTc5&ts=0
-
I can buy
... BUY??? :o
I think you shouldn't pay for a defect Behringer Mixer! They're are almost for free when buy them new.
Greets, Roger
-
That's what I thought I'd probably have to do. No biggie really, I'll just keep an eye on the Fleamarket ;)
... you should put yourself on the list anyway... who knows, perhaps we'll make the 750.
Greets, Roger
-
... ich finde es cool, wenn Leute kreativ sind und ich lege auch Wert auf Ästhetik.
Nur würde ich bei einem Controller "schön" nicht vor "funktionell" stellen.
Bei Deinem Beispiel mit dem Button, bei welchem man die Beleuchtung nur von oben sieht, würde die Hauptfunktion "Status-Anzeige" total verfehlt werden.
Beim Langloch, wirst Du je nach LED Abstrahlwinkel und Dicke des weissen Füllmaterials (ich würde eher halb-transparenten Silikon verwenden) die Abstufungen nicht mehr erkennen, was das Ablesen eines ungefähren Wertes zusätzlich erschweren wird (... was mit 11 LEDs eh schon schwierig ist).
Aber wie gesagt: Go on being creative!
Greets, Roger
-
Man müsste einen Plexiglasring als Lichtleiter bis nach oben führen. Dann wäre es perfekt.
... angenommen die LEDs haben einen Abstrahlwinkel von 60°, dann wäre am Ende des Lichtleiter Rings vermutlich nicht wirklich ein "DOT" zu sehen, sondern mehr ein verteilter Schimmer, da die Reflektionen in alle Richtungen verteilt würden, bis sie zu schwach werden. Um einen Punkt am anderen Ende zu erzeugen, darf nur paralleles Licht z.B. mit diskreten Leitern geleitet werden.
Grüsse, Roger
-
Did you try to just solder some new "feet" to them?
Greets, Roger
-
im guessing you cant dynamically dim an LED so im not entirely sure what kind of light you would use
... yes you can
but having both would be useful
... not really :(
It's nearly impossible to scale the brightness... remembering to what position you had set the pot last would even be more accurate
Greets, Roger
-
so, can i use a converter to USB?
... did not work for me, but I don't know if it depends on which brand you're using.
I had to refit an old P3 Motherboard which I only use for the Bootstrap loader.
You have to try :-\
Greets, Roger
-
Vielleicht mit einiger Latenz
New midi controller with seperate jog wheel?
in Miscellaneous
Posted
... depends on your software, if it allows you to specify more than one controllers. Otherwise there would be the possibility (with MIDI, not USB gear) to use a MIDI Merger.
http://www.jlcooper.com/pages/mcs3usb.html
... there is also a MIDI version available.
Greets, Roger