-
Posts
277 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by xarolium
-
-
Count me for 2 set of PCB
thank you
-
Great project Sonicwarrior
i would like to know if you ever test this PCB and it's possible to only buy you the PCB because i already have some 525
-
Hi Eddy
I would like to know of you send the Knob
i'm so imptatient to recieve it
thank you for your work in the midibox community
have a nice day
-
yes i would like one
where did you find it?
-
i know that i talk english like a frog
it s normal because i m French ::) ::)
-
I just understand that this order is just for the kit without PCB
anybody know when new pCB will be available.
and of course now i would like a KIt without PIC and SID
Can you put me Wilba on this list
thank you
-
I use it to drive my MS 20 , SH 101 MC 202
i will take more picture next week because i use it on Friday and i don't have any time to open it
but it's a little crap inside
-
here my midibox CV between my VF 11 and my 828MKII
-
cool
i will buy you one when you recieve it
i hope soon ;D ;D ;D
-
yes i made it
but i would like to know when yours will be available?
and how much do you sell it?
-
ok merci moxi c'etait justement mon doute
je vais pouvoir enfin finir mon SEQ V3 depuis le temps
au fait bien passer ta soirée
-
hi everybody
i make a pcb with the memory the core and the out only but on the out only schematic here http://www.ucapps.de/mbhp/mbhp_iic_midi_out_only.pdf
there isn' t J3 port to configure the adress
i would like to know if i have to add it or if i can chain 4 "IIC module out only" without J3 port
thank you
-
je relance le sujet
si quelqu'un pouvais m'aider
merci
-
Salut a tous les midiboxers
Je suis entrain de faire un PCB qui réunit le core les mémoire et les IIC midi
mais je ne sais pas comment on configure les IIC out only dans le cas ou j'en met plusieurs en chaine comme sur le schéma il n'y a pas le slot J3.
Je voulais savoir si je pouvais les monter en parallèle et s'ils seront bien tous reconnu
merci pour votre aide
-
You have right TK it will be very hard and not very intuitive to use this screen
i think i m going to stay with my two 40X2 LCD it s look like better.
thank you
-
I would like to know if i can use a 8X24 lcd for my seq V3
the datasheet of the LCD is here
http://perso.wanadoo.fr/inoxitan/eBay/doc/8x24.zip
thank you
-
Je compte prendre le matos chez mikes-elektronik, avec un pic 18F452 "pré programmé".
d'ailleurs au niveaux de la prog, une fois le bootloader programmer tous ce gere par midi ??
Oui tu peux changer ton application via une simple interface midi
La config est sauvegardée une fois l'alim coupé ou il faut obligatoirement une 24LCXXX ??tous dépend du projet que tu entreprends de faire mais si par exemple tu veux faire un MB64 et que tu configure tes pots il faut que tu sauve ta configuration sur une mémoire sinon tu n'aura qu'une mémoire sans 24LCxxx
Quel projet tu comptes réaliser?
-
I don't think you can use the BA662 because it s in the 80017A and you must take away the coat of resin and it will be very hard
Try to do it if the chip are dead
And i have a question too
i would like to know if somebody found a equivalent for the rotary switch encoder.
because digikey is out of stock
-
if you are looking for key switch you can buy a old keyboard computer on ebay and take the switch to make your sequencer
that is what i made javascript:void(0);
Insert Image
i bought a old apple keyboard for 2€ to make my sequencer
it s very cheap and design i find
this is this keyboard
-
Somebody know who was the last guy who recieved his kit.
it s just to know if the list advances because i'm so impatient to recive my PCB
-
Ganchan i recieved it on Monday and changed all the switch on my tr 606 and it work great
but i don't have enought test it in the time to say that they are strong
-
If you re looking for the same switch you can find on ebay realy cheap part like this
http://cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&rd=1&item=130160893329&ssPageName=STRK:MEWN:IT&ih=003
-
Merci Moxi
Juste une autre question j'ai vu quelque part qu'il fallait mettre un peu d'huile pour que les endroit ou on a pas imprimé soit transparent apres le sechage.
-
Je viens de recevoir mes feuilles lazertran et j'aimerai savoir si quelqu'un s'en était deja servi car je n'ai pas envi de les gacher
donc si quelqu'un pouvais m'expliquer comment on s'en sert ou me donner un lien qui explique comment les utiliser, quelle imprimante donne le meilleur rendu
merci
Icecubes - Bulkorder
in Bulk Orders
Posted
I'm still waiting for mine
when did you send it MTE?
thank you