-
Posts
790 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by julienvoirin
-
-
I don't know !
I ve found 8 of them in a trash ; seems to be interphones. As my friend told I was making "Voirinof" (notice the russian accent), it was the perfect case for (70's Eastern Europe style). Buttons where included, and 1x DIN5P too ; that is why I recycled. Practical and cheap (15€ bargain each time, used for SID too).
-
welcome aboard !
as stryd and david said, you will have to develop by your own what you want. but there is all what is needed on ucapps to help you out.
buying a UC33 would be faster and easier (and cheaper too)
look at it :
http://www.midibox.org/forum/index.php?topic=9666.0
i use it to trigger clips in ableton (64 real buttons, but 16x64x2=2048 virtual available, using layers and the 16 midi channels).
the mixing in ableton is controlled by my mackie control so i did not focused on faders.
firmware 1.1 works ! (all is working)
for the controller of sasha, you need to add AIN modules and complete the code (not hard). you can also add encoders (not hard) via DIN modules. look at the examples at the bottom of the page in :
http://www.ucapps.de/mios_c.html
BUT you can build it, easily.
Qbas has developped a firmware which enhance the matrix to 1024 buttons !! (not tested)
For that you will need a PCB.
-
Hi Stryd
yes that is the idea i had. i have the schematic of an algorithm, based on clockbox with an independant RTC (rec time counter) driven by the clockbox. the problem i had was the buffers (Rx >> bufferA>>bufferB>> bankstick) and the arrays used. i did it with a superchampion of programmation (i am pure newbee, but understand fast). let me know if interested
regards
-
i did it : a remote for ableton
http://www.midibox.org/forum/index.php?topic=9666.0
and if i am motivated i will add duo led control FROM ableton (but need to create a new PCB)
-
so what's up with this project ? i am also interested, and really really interested to know how you record midi. I would like to develop a midi recorder. i have already some idea of the algorithm based on clockbox if it can help a little.
-
too late ... no I am kidding ;D
I were sure that this awful piece of metal was not there for nothing. I solved my problem by redesigning the panel.
thanks for your reply nils
-
Hi
where can I get the switch used by Wilba on his CS for the MB6582 ???
looking for a french retailer ...
thanks
-
Very good link !!! Super interesting
-
Hi Midiboxers
I am building a SEQ v3 and I would like to remove the metallic shield of LCD Displays to make them thinner.
It seems it can be made easily.
Is there any failure to do it ? What is it supposed to do ?? (Except protecting device).
Thanx
-
Thank you again Wilba. Now there is all the needed information for switches :
total height : 13 mm
must fit a hole of 3,5 mm, so 3mm for the shaft.
-
thanx wilba !
are they those sold by Voti as SW5 or SW7 ?
regards
-
what is the references of the switches used for the front panel ?
regards
-
What a Jacka** this Blue Lantern !!! Il nous ferait prendre des vessies pour des lanternes !!(bon OK c'est limite)
c0nsumer good luck!
-
Hi Wilba
I am in TOO ; need 4 (or 6 depending of the price). Will it be the same price as 6th month ago ? and i read in another post you will give caps within, nice ;)
I ve checked the PCB of 6582 tonight, very well done, very intelligent. And the description of the jumpers and all is very good to understand. Nice work
Cheers
-
the table look up is more my idea ;)
do you have some examples of C code of that ? I will try and maybe (certainly should I write) ask some advices. My idea is to have several layers for the 8x8 surface (i can make it, i already coded it for3 layers)
cheers & thanks
-
Hi David !
sorry for the delay, i had forgotten to be notified for reply ...
What i need is very simple : all feedbacks messages from Live !
And I am specially interested by (to know if it can be possible) :
On my projectmix i/o I can navigate through the columns and rows of Live using 4 buttons (left/right/up/down arrows). What I would like is a direct addressing to the clip of the Rth row and the Cth column of my Liveset when I type on my 8x8 scan matrix. You can do that by using the midi assign functions of live but that mean mapping each clip. What I want is avoiding the mapping.
More about my 8x8 matrix :
http://www.midibox.org/forum/index.php?topic=9666.0
Best regards
-
Thanks a lot lot lot Wilba !!! (received this morning)
-
Hi Reset
very interesting !
is your project a total replacement for the control surface of the sequencer including all the features of the seq v3.2 with only a c64 keyboard, 2 displays and some LEDs ?
-
i am interested for ONE case please. shipped to France
-
very very interesting, and very well documented !
huge job !
-
i am very interested about the "midi feedback" feature of Live, does anybody have links to concrete and very deep coding about it ? I planned to develop a controler based on this.
cheers
-
-
I am interested by 1 set of the alternate design too !!
Cheers
-
I have published a post in the user projects section :
http://www.midibox.org/forum/index.php?topic=9666.0
There are more explanations about the way it works and a better firmware. Additional encoder and a foot pedal !!!
It is obviuously copied from MPD16 and MPD24 from Akaï !! But I discovered that this company had developped the Control surface I wanted to do : MPK49. Finally, I am not so stupid ;)
Have fun !
Midibox groove
in MIDIbox User Projects
Posted
Hi Stryd !
I ve too find back the .src
hijacking .... ???
I know car jacking :-X