tobsen

The first words ;D http://youtube.com/watch?v=27Oa2F-qI4U The final... And again a huge thanks to Thorsten and the complete community for all the tips!!! ;D I´ll be back with a Midibox FM as soon as some sounds come out of the OPL3 but it seem´s that the smd were fried... Thanks and a happy new year! t.

The buttons were the most exhausting work. They are made of a simple plastic pole for 1,50€ and the tactile switches for 12c each. The plastic was very hard to edit and sanding was really boring and took a little eternity...

There´s nothing better than a working module on the first try... The AOUT for my forthcoming analog synth The cable hell in a earlier stadium

Well it´s a shitty cam... It was my first project with professional PCB, dear beginners, don´t hesitate to build one... ;D

One of the last this year i think, i had to make longer break because of other things, but now its almost finished. It´s not state of art, but let´s say "Hausmacher" or homebrew... ;D First i had some trouble with jittering LED´s, like T.K. said, a resistor on the last pins of the DOUT helped. A big thanks to Thorsten for his awesome work and project here!!! Und ein guten rutsch ins neue Jahr!!! ;D Some flixx: and greetings to fibranijevidra ;D

Halt! Bei mir hats auch immer kräftig geflimmert. Wenn ich mit den Fingern die "Schluss-Pins" vom DOUT berüht habe hats aufgehört. Ein 150ohm Widerstand gegen Masse macht den Job jetzt erstklassig... ;D

o.k thanks! I´m in with one Set

How much does it cost to ship to germany approximately??? Is it possible in general? greetings

Nice work!

Hello, I like to put in the AOUT and two anolog filters in my fothcoming fm Synth. The first question is: The MBFM has a "true stereo" output? or is just the same signal distributed to the output jacks (i only like to build one stereo out) Well, I have the AOUT_LC already, it provides two cv conections, when I like to control the two analog filters (stereo), do i have to amplify the cv signal, or can i conect it directly to the filters? Furthermore, is it possible to assign the LFO or EG for example to CV1 AND CV2 of the AOUT? or is only one modulation destination selectable? I think it would also be a nice option to have the two filters independent... so long... some more will follow... ;D THX

for me, it looks possible, but when i see the price... i would spend this money defenately for some other things...

hi, i´m planning a fm box too ;D The 5V PSU is needed to provide the core module. the 12V PSU is needet for the opl3. But take care!: the 12Volts are symetrical, this means there are 12V+ | 0V | 12V- rails. i suggest that you solder your own psu out of a 15V or 18V Transformator.(it´s also good practise and very cheap) all parts are available at reichelt... i used this very often, its easy to modify and cheap http://www.generalguitargadgets.com/pdf/ggg_bipolar_ps.pdf sorry for linking to another page ::) if you would do it on breadboard, take care of the diffrent pinout of the voltage regulators...

Nein nicht direkt. Ich hatte bis jetzt ein Waterslide Decal aus einem anderem Shop, aber keine brauchbaren Ergebnisse erzielt. Das Problem war das, dass man immer immer ein quadratisches Stück der Folie um die Schrift hatte, und die Folie nicht 100%ig durchsichtig war. Bei dem anderen aus dem oben genannten Shop ist der Vorteil, dass nur das bedruckte erhalten bleibt, der Rest sich auflöst, und das ganze so dick ist, wie man vorher mit Klarlack überzogen hat... Sobald ich die getestet habe schreib ich was dazu, bin gerade erst mal froh dass der Sequenzer läuft... ;D

Hallo midiboxers, langsam, sehr langsam geht mein seq in die 2. Runde, das Gehäuse. Da es scheint, dass das Waterslide Decal Mangelware hier in de. ist möcht ich mal eine Bezugsaddresse posten, ich denke es könnte mehr interesieren... http://www.druckeronkel.de/ bzw.:http://druckeronkel.de/shop/catalog/ Ich werde damit mein Panel Beschriften, kann dann gern über Ergebnisse berichten... grüsse

hey thanks, but i know it already... superp funky, i hope the people got down on this 8) i´m from Frankfurt, i´m looking forward to if you are around oneday, btw let me know if yes...

Hi all this my first Post, i´m going to build a mbseq soon... ;D I only want to honor the music by sneak thief, in my city the clubs would explode i think... For my point of view, this mixes (i heard several) are very great funky electronic dancemusic. Very nice performance, i heard no mistake or whatever and there are many , lets say influences, like disco, techno and also pop, in a well sounding way worked up... I guess the partys were big fun 8) Well and it´s to be heard that the 90ies are comming, maybe in the same way like the 80´s has been hyped... Cheers and keep rocking!