boops
Members-
Posts
202 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Everything posted by boops
-
chat here,chat..there..and my pot/led issue is forgotten..you can remove it if you want..best regards
-
Hello,all how can i have a led workink,when i tweak a pot which is connect to a ain,(is it possible without a Dout)? i read there is the code in the midibox 64 .hex for the buttons and a dout .is it the same with the Ain?...best regards and thanks for the help Boop's :sorcerer:
-
Hi nILS,do you fine?where the damned chat now :question: thanks Humour is a great,but it don't give me where to look for (the pot and led):purple:
-
Hello,all how can i have a led workink,when i tweak a pot which is connect to a ain,(is it possible without a Dout)? i read there is the code in the midibox 64 .hex for the buttons and a dout .is it the same with the Ain?...best regards and thanks for the help Boop's :sorcerer:
-
Hi all,the dump works fine with midiox 7.0 and my sound card (rme fireface 800)i will try it with the pots soon.best regards
-
i will try this tomorrow ,thanks for your great help...regards
-
Hi TK it's for the mpg 80(roland mks)MB 64, i am building with Rasmus..the setup.hex(value min ,max is ready :attachement file) but it seems the serge editor doesn't works with mios 1.9 to load it(this setup)in my bankstick After loading,it's written "dump invalid" how can i do? thanks for the answer. MKS80_OK.zip
-
hi,i ve got a issue for a loading: - a special set up ,for midibox 64 (using the serge editor) my primary bootloader is 1.2 ,and after several tries,impossible to load the mios 1.8(mios 1.9g works fine).; Question: if is it possible to load the mios 1.8 with 1.2 bootloader?how can i do that(loading mios 1.8) .thanks for your answers
-
hi,i am always in for 5 as i 've written in the prof list ,regards
-
Don't worry about it . :console:
-
hi ,i ve always got pcbs..thanks
-
a midibox 64 or other? to replace a too much expensive roland mpg 80
boops replied to boops's topic in Design Concepts
good news..the file for a mb64 ,mpg 80 for all the mks 80 tone and patch controls is ready,just i have to try it in a few days...i will let news... Thanks TK(again )and Rasmus,a real good guy:-)pm me if you want it..wait a fews days please,for test..best regards Boop's -
a midibox 64 or other? to replace a too much expensive roland mpg 80
boops replied to boops's topic in Design Concepts
After a few days: ;) Here is the sysex format used: Each message consist of 10 bytes Remember All here is in hexadecimal values F0 41 36 0F 20 (variable A.....20=tone or 30=patch) (variabel B parameter select) 01 (variabel C value of parameter) F7 F0 41 36 0F 20 (XX) (XX) 01 (XX) F7 All together = 10 bytes there are 48 knobs for tone edit (variable A....20=tone) there are 16 knobs for patch edit (variable A....30=patch) variabel A can either be 20hex or 30hex only 2 possibilities variabel B can be from 00hex (00dec) to 30hex (48dec) when variable A is 20hex (tone edit) variabel B can be from 00hex (00dec) to 10hex (16dec) when variable A is 20hex (patch edit) variabel C is depending on how many values there is in the different parameters (tone edits or patch edits) The difference from a normal midibox is that the strings are longer and have more variables I l have to change the firmware to support the 3 variables and make these new meta events .....Who can explain mefor that ,an example..please below a part of the midi implantation..thanks Here are the different values for each pot/switch: All values are in decimal tone edit 1=0-100 2=0-100 3=4 position 4=0-100 5=0-100 6=0-100 7=0-100 8=3 position 9=2 position 10=0-100 11=3 position 12=0-100 13=0-100 14=2 position 15=3 position 16=pot 17=4 position 18=3 position 19=3 position 20=pot 21=0-100 22=4 position 23=0-100 24=0-100 25=0-100 26=0-100 27=2 position 28=2 position 29=0-100 30=0-100 31=0-100 32=0-100 33=0-100 34=0-100 35=0-100 36=2 position 37=2 position 38=0-100 39=0-100 40=0-100 41=0-100 42=0-100 43=2 position 44=0-100 45=0-100 46=0-100 47=0-100 48=0-100 Patch edit 49=4 position 50=pot 51=0-100 52=11-88 53=5 position 54=0-100 55=0-100 56=3 position 57=0-100 58=0-100 59=3 position 60=3 position 61=0-100 62=2 position 63=0-100 64=not used mks midi implant.doc -
I am selling 3 Â of my ultracore pcb's new,(unpopulated, original quality). Contact me by PM for details and make fair offer. Â around 12 euro plus paypal fees +shipping ;best regards ....i am in Europe(france).
-
Hi theprof what do you planned for the pactec? best regards
-
hi,of course a another 9v transfo for the 5v of the core..the 30VA 2 x15 works fine for the -12v ;+12v... i 've build with a classic shematic,regards
-
hi i 've used a 30VA 2 x15 works fine...regards
-
hi Wilba,Reboot gave me my pcb and parts sequencer..thanks for your job,thanks Nebula too ,Best regards Boop's
-
40x2 Green-on-Black Optrex Displays - ORDERING INSTRUCTIONS
boops replied to fussylizard's topic in Bulk Orders
Hi Cris LCDs received today! ;)...this is not packaging...at this level of perfection ,this is ART...best regards ;Boop's -
40x2 Green-on-Black Optrex Displays - ORDERING INSTRUCTIONS
boops replied to fussylizard's topic in Bulk Orders
ohhhhhhhhhh cool ,my lcd!!!! :P thanks Cris. -
40x2 Green-on-Black Optrex Displays - ORDERING INSTRUCTIONS
boops replied to fussylizard's topic in Bulk Orders
Hi Cris payment done..thanks for your work!!!Boops