boops

1024 KB per post and 1024 KB per attachement...find the error ;) chercher l'erreur 8)

hi, my last pictures were bad ,i 've bought a better device...then more size..i will try for small size pictures...sure. ;)

and my old 70's proformant ms 2000 wood case !!everything (thinks )are always work very fine,on it. P190908_01.11.JPG

wood and electronic ....i love it....plastic iznogood!!! my sid stereo,p3 .and the space station ..sst 206 ursa major P190908_01.05.JPG

here my first project mb sid stereo,wood panel....sounds goooood!!!thanks all P190908_00.54[02].JPG

hi,i 've thought this summer, a control surface A ,a little more different on my first mb project ;a sid stereo not totally finish(thanks Reboot,wilba ,stryd,Tk,Smash and super NILS and other gentle guys here)..it's only to have the possiblities of control all the knobs without move my hands(i am a old guitarist with a pain in the right shoulder...think about that for your old days ;-)), which are putting on the wood desk panel ..a few pictures of my right hand who control the encoder, the shift,up and down and menu buttons...the other buttons are controlled with the left hand.hope to give some "ergonomie "idea edit here the fpd file.with M3 under the panel ...reajust them with your board,and your hands ;) P190908_00.57[01].JPG mbsidv2_my stereo 14 8.rar

P190908_00.50.JPG

hi seppoman i received my 5 nice pcbs...thanks for your works...boops ;)

hi,i can say today ,i 've wait a parcel during 3 months...lost by the post...i was very very happy when smash refund me a new order (400 $)completely free (order and shipping) all my next orders will be by express...sure..thanks smash ;) best regards all.

i don't know the price but....i'm sure ....niles Rodgers isn't the producer of this music!!! fat man but cheap sound,mongomerry style ....he grows up under one of his sofa ,it's better behind a wardrobe ,much more thin ! manger, bouger ! ;)( french pub)

hi ultra ,my 3 pcbs are arrived at reboot home ..thanks

thanks nils..problem...was 750 ms beetween block ...in the read me it is notified..patches are here now ...sehr gut!!!i want just use the unused din entries in my DINx4...for a few encoders...a+

hi i am on last step of a sid stero 6582 .. 1- when loaded vintage bank...only patches 01 02 04 06 to 128 are in bankstick ...no 03 05 etc....these patches are empty and the sound is the 01...my banksticks are 512k ..why only the even? 2-at the start i 've loaded set up 6582 and my lcd 4X20 working with 4 lines info,i've changed for 8580 for match with the din map of TK...only two lines,now...is it possible to have set up 6582 matching with DIN map TK....anyone has the din map of set up -6582 (other than .asm)? 3- i would custom a simple cs A with encoder filter resonnance and cut off to use my din X4..by example...i know encoder work by DO and D1 etc...reprogramming .asm is the only way? thanks....my first 64 patches SOOUND GOOD....hummmmm

ok ... thanks nILS!!! 8)

for newbies chat is the good place !!!!!

Hi i am just update with v2 0RC 23 (with success) with mios studio cause i can put ID 6 ..but i must change this id 6 !!!i make an error when i order to smash tv..cause i will planed several midibox projects and i 've thought like scsi..

;)you ,ve danced with a only single sound.... :-[see my post in troubleshooting...sound good but i can't change anything...banksticks formatted...but cs not enabled!!!

hi,at the last step of my sid stereo..cs...i find "cs not enabled" this post is a little old..; 1-my version is v2 0RC22 a friend of mine installed it...i am not sure it's not slave .hex!!! 2-my id pic core is 6...must i changed to 0...?in the download section in change id fonction ,unnluckly there isn't some file: change id6to id0 .hex...anybody can help me to make it if i must change the ID 6 can i send a .syx with mios studio ? can i choose my ID in midi ox.?..to try to install ver RC 23 ??? ??? ??? ??? ???THANKS

yes,i 've got the sid noise in the mountain!!!!with a little ground noise(like overdrive on guitar...noise gate,i think)awaiting a C64 psu..can i try to put off some Vs here or there?......i have to built bankstick and cs...thanks Stryd

i took the VS on the core and i've got the 5V everywhere i need..i will see for noise and ground loop( perhraps) later...

hi,here ...the sid shematic...below...voltage are 5V and 9V for me ..unluckly i've got around 5,83V on the sid module beetwenn pin 8 and 16 for the two ICs...8,88V beetween 14 and 28 ,and 5,83 V beetween 14 and 25 on IC1 ...but on the core i've got the 5V and it's works fine ,i have to put the LCD in 4 bits...don't forget,i take my 9V just after the 7809 on the sid.. 240V--->xformer--->13V500mA--->7809--->7805---Core \ '--->SID connections beetween core and sids are done.. no c 64 ON ebay..? Boops mbhp_sid_v3.pdf

after the connections..see above, i ve found around 5,8 V on ic 2 and ic 3 ...it seems too much regarding the initial 5V??? on the core i 've got 5v and on the sid chip C1 9V ...i didn't put the ics no sound for the moment... :( PSU is an art!!!!

i find this: i ve got a 4X20 lcd i soldered all the pins, and my core work...i 've got a doubt ,do i run it in 4 bits, for a single core and 2 sids..thanks

thanks again Stryd answer here: 8) i have to learn to search in this forum before learn electronic!!!! ;) cause i put too much complex tags Connecting SID to CORE

thanks but i ask the question in another manner /where the MD (which mean?)pin of the core ,on J2 ,on the sid module?i only find SC(which mean?)at the same place on the smash tv sid module... ???