puddingbrumsel Posted February 19, 2008 Report Share Posted February 19, 2008 Moin!Reicht ein einzelner Bankstick aus um Ensembles und Patches zu speichern ? Hab auf die Empfohlenen 24L512-Chips gewechselt. Bin aber erst jetzt darauf gestoßen, dass ich in der Firmware die Ensemble-Chip-Adresse explizit angeben muss. Bei mir noch standard auf 7, was ja falsch ist da ich nur einen eingebaut habe. Problem ist dann aber, dass ich nur auf Ensemble 001 speichern kann. Welches ja dummerweise mit jedem Firmware Update überschrieben wird ^^Danke schon mal für die Antwort und fürs lesen.MfG die Puddingbrumsel Quote Link to comment Share on other sites More sharing options...
nILS Posted February 19, 2008 Report Share Posted February 19, 2008 Für Ensembles brauchst Du einen eigenen Bankstick - also brauchst Du mindestens 2. Allerdings reicht für den Ensembles-Bankstick ein 24LC256. Am einfachsten ist es, wenn Du den dazu einbaust und auf die ID auf 7 "stellst" (indem Du die entsprechenden PINs auf Vss und Vdd setzt) - somit musst Du beim Firmware update nichts ändern. Quote Link to comment Share on other sites More sharing options...
puddingbrumsel Posted February 19, 2008 Author Report Share Posted February 19, 2008 So, hab mal nen Entwurf gemacht wie es für mich mit Bank- und Ensemblestick aussehen könnte. Sind beide auf einem Sockel untergebracht, da ich in meiner Box keinen extra Platz vorgesehen hab. Der Ensemblestick wäre Standardmäßig auf 7.Nicht schön aber selten. Vielleicht hat ja jemand noch was beizutragen.MfG die Puddingbrumselps. thx @nils für die schnelle Antwort - ich hatte es fast befürchtet mit dem 2. Chip :P Quote Link to comment Share on other sites More sharing options...
TK. Posted February 19, 2008 Report Share Posted February 19, 2008 Clever!!!Gruss, Thorsten. Quote Link to comment Share on other sites More sharing options...
nILS Posted February 19, 2008 Report Share Posted February 19, 2008 Ein wirklich winzige Kleinigkeit - wenn Du die beiden ICs tauscht kannste den einen Jumperwire kürzer halten weglassen ;-)edit: Hab mal ein Bildchen angehängt. Quote Link to comment Share on other sites More sharing options...
puddingbrumsel Posted February 20, 2008 Author Report Share Posted February 20, 2008 Hast recht - hab ich auf Anhieb gar nicht gesehen. Danke! Quote Link to comment Share on other sites More sharing options...
Pascal Posted February 20, 2008 Report Share Posted February 20, 2008 Kurzer Einwurf von mir, kann ich nen 24LC512 mit einem 24C512 von Atmel mischen? Quote Link to comment Share on other sites More sharing options...
nILS Posted February 20, 2008 Report Share Posted February 20, 2008 Ich zitiere mal eben http://ucapps.de/mbhp_bankstick.html:Availability of 24LC256 from Microchip and 24C256 from Atmel: * 24C256, Part #ST 24C256 BN6 at Reichelt for EUR 2.10 (the part number implies that this is an EEPROM from ST, but since 2004 they deliver an Atmel device with CS (chip select) inputs * 24LC256-I/P, Part #150234-14 at Conrad for around EUR 2.80 * 24LC256-E/P-ND at Digikey for around US $2.40 * 579-24LC256-I/P at Mouser for around US $1.70Alternatively also a M24256 EEPROM from ST can be used, but note that this device doesn't provide the chip select inputs which are required for MIOS to address one of eight BankSticks. The address of the M24256 is fixed to 0!Note also that the Atmel 24C256 only provides two chip select inputs (A0 and A1) which limits the maximum number to 4. It seems that 3 chip selects are currently only provided by Microchip derivatives:D Quote Link to comment Share on other sites More sharing options...
puddingbrumsel Posted February 20, 2008 Author Report Share Posted February 20, 2008 Ach Nils ...jetzt hab ich es nach deinem Vorschlage gemacht, aber hier fehlt dem IC1 der Ground ::) Hab grad durchgeklingelt und die Misere aufgedeckt. Manchmal sieht man aber die einfachsten Sachen nicht. Komme also um ne neue Brücke nicht herum. Muss ich morgen nochmal ran.MfG Quote Link to comment Share on other sites More sharing options...
nILS Posted February 20, 2008 Report Share Posted February 20, 2008 Au weia :-[ 'schuldigung! Quote Link to comment Share on other sites More sharing options...
puddingbrumsel Posted February 20, 2008 Author Report Share Posted February 20, 2008 Ach - macht doch nix - so lernt man wenigstens was. ;DMfG Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.