Changing MIDI channel

[sparx]

OK, have managed to get my 6582 up and running, I can hear the formatting sounds when I add a new bankstick chip and at switch on.

BUT how do I change, from the control surface, the MIDI channel that the SID responds to?

On the LCD it says 16 and I need to change it to 1.

Have had a tweek, looked in the manual and searched the forum but can't find it, so can anyone help?

Thanks and regards

Sparx

[nILS]

http://www.ucapps.de/index.html?page=midibox_sid_manual_up.html

1) Press the left-most menu button

2) Press the menu button under INS

3) Press the menu button under Chn

3) Use menu encoder to set channel

4) Done.

[sparx]

Thanks Guru Nils

http://www.ucapps.de/index.html?page=midibox_sid_manual_up.html

4) Done.

Yes, I found that in the manual, but the option to change any channel isn't there.

So, not done  :'(

Anyone else experience this or offer any help?

Thanks and regards

Sparx

[nILS]

Not there? If that's really the case then the mb6582 firmware is really different - so I assume it would be faster for someone who's got an mb6582 than for me to dig through the source.

Anyways - I'm curious now:

1) Does pressing the left-most/first menu button get you to the "Ensemble" menu?

2) If so, what are the menu items you can select there? I don't see any changes to the menu structures for the mb6582.

[sparx]

Thanks

Yes, pressing the left most menu button does get into the ensemble menu and I have the option of INS.  Selecting this I get:

Osc, Wav, S/R, Del,Atk,Dec,Sus,Rel,PRn,Trn,Fin,Por,Phs,PW,GSA,Det

No option, so it seems to chnage the MIDI channel.

Anyone?

Regards

Sparx

[nILS]

How did you end up in the OSCillator menu? What you describe is that opening the ENSemble -> INStrument menu brings you to the OSCillator menu page, which is weird.

Again in the root menu, the one that reads sth like

E002|A001 Ld Chn. 1
1***|Lead Patch[/code]
press the menu buttons 1, 4, 3.

[sparx]

How did you end up in the OSCillator menu?

pressing the left most menu button does get into the ensemble menu and I have the option of INS.  Selecting this I get:

I can only report what I am seeing!

I think there is a problem with this button as if I move the display so INS is in another position I can change now change the MIDI channel, so looks like I have found the cause of this if not the cure which I suspect is the cable linking the 2 boards.  Will check later

Thanks for your help, you truly are a MIDIBox Guru now Nils.  How is the pokey board coming along?

Regards

Sparx