nILS Posted August 12, 2008 Posted August 12, 2008 Congrats, that thing looks sturdy ;DI'm not sure I wanna see a gut-shot though ;)
DenDer Posted September 7, 2008 Author Posted September 7, 2008 So for all who wants to see the inside here we go........GUT PICS. ;DPic nr 1 is the back of the pic socket. I've separated this part so the socket is on the outside. Quit some fiddling that was.2008_0907Image0001.JPG
DenDer Posted September 7, 2008 Author Posted September 7, 2008 This is a picture from the pcb. As you can see i've made connections to run on battery's or a PSU.Top right you can see a red and black wire for the battery's and two blue ones for the psu.2008_0907Image0005.JPG
DenDer Posted September 7, 2008 Author Posted September 7, 2008 Yet another one. From the back of the main pcb.2008_0907Image0006.JPG
DenDer Posted September 7, 2008 Author Posted September 7, 2008 Some more pictures...To do like i did...with the separate pic socket, just run the wires that come from IC 2 & 3 to the pic socket including a ground wire.The LPT cable i soldered directly to the pcb......for all who are going to re use an old cable do a beep test on the wires with your multimeter...it saves a lot of headaches. One wire wrong and the bloody thing won't work.2008_0907Image0002.JPG
DenDer Posted October 6, 2008 Author Posted October 6, 2008 A question about the burner.....is it also possible to make an adaptor for 8 DIP pic's? I want to burn some 12F675/629......and which program can i use for burning these small ones?
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now