DenDer Posted August 12, 2008 Report Posted August 12, 2008 Here are some pics of my Burner build. Quote
DenDer Posted August 12, 2008 Author Report Posted August 12, 2008 Why don't the pics show anymore? :-\ Quote
nILS Posted August 12, 2008 Report Posted August 12, 2008 Congrats, that thing looks sturdy ;DI'm not sure I wanna see a gut-shot though ;) Quote
DenDer Posted September 7, 2008 Author Report Posted September 7, 2008 So for all who wants to see the inside here we go........GUT PICS. ;DPic nr 1 is the back of the pic socket. I've separated this part so the socket is on the outside. Quit some fiddling that was.2008_0907Image0001.JPG Quote
DenDer Posted September 7, 2008 Author Report Posted September 7, 2008 This is a picture from the pcb. As you can see i've made connections to run on battery's or a PSU.Top right you can see a red and black wire for the battery's and two blue ones for the psu.2008_0907Image0005.JPG Quote
DenDer Posted September 7, 2008 Author Report Posted September 7, 2008 Yet another one. From the back of the main pcb.2008_0907Image0006.JPG Quote
DenDer Posted September 7, 2008 Author Report Posted September 7, 2008 Some more pictures...To do like i did...with the separate pic socket, just run the wires that come from IC 2 & 3 to the pic socket including a ground wire.The LPT cable i soldered directly to the pcb......for all who are going to re use an old cable do a beep test on the wires with your multimeter...it saves a lot of headaches. One wire wrong and the bloody thing won't work.2008_0907Image0002.JPG Quote
DenDer Posted October 6, 2008 Author Report Posted October 6, 2008 A question about the burner.....is it also possible to make an adaptor for 8 DIP pic's? I want to burn some 12F675/629......and which program can i use for burning these small ones? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.