Guest smurky Posted February 10, 2009 Report Share Posted February 10, 2009 Does anyone have any tips for soldering this kind of pot?http://www.bendables.co.uk/shop/shop.php?c=viewproduct&pid=34&cat=17&maincat=4&start=0&sid=sidb636e801c2b6be15c7f7ad9f7f72bf51My local store doesn't have pots with solder lugs. I want to panel mount the pots (no problem), but soldering wires to those pins... is there an easy way to do it? Quote Link to comment Share on other sites More sharing options...
lief138 Posted February 10, 2009 Report Share Posted February 10, 2009 You need three hands or a soldering clamp thingy like the third thing down in this linkhttp://www.mediacollege.com/misc/solder/accessories.htmlor a weight to hold the solder in place... or perhaps a small animal that is well trained.... Quote Link to comment Share on other sites More sharing options...
stryd_one Posted February 10, 2009 Report Share Posted February 10, 2009 wrap the stripped cable round the pin, solder ;) Quote Link to comment Share on other sites More sharing options...
Flexinoodle Posted February 10, 2009 Report Share Posted February 10, 2009 Probably a completly wrong way to do it but anyway here goes hahhahahahaI usually tin both the pin and the wirethen use a croc clip to hold the wire to the pinThen heat the f**k out of it with the iron till they joinOK i'll get my coat Flex Quote Link to comment Share on other sites More sharing options...
philetaylor Posted February 10, 2009 Report Share Posted February 10, 2009 OK i'll get my coat lol. The only problem with this is there is no flux left in the solder once you reheat it so you may get a dry (or brittle) joint. I tend to agree with s1 here, wrap the wire round the pin and then solder.Phil Quote Link to comment Share on other sites More sharing options...
Guest smurky Posted February 11, 2009 Report Share Posted February 11, 2009 >> You need three hands Right then, I'll start taking the dietary supplements. Thanks all for the advice. Quote Link to comment Share on other sites More sharing options...
/tilted/ Posted February 11, 2009 Report Share Posted February 11, 2009 If the pots in question are indeed the type in the photo you posted, you could pass the wire through the rivet-post, adjacent to each pin. These are electrically connected to the pin, and are, uhm, hole-shaped. Can something be shaped like a hole?As these rivets are right on the carbon track, you don't want to cook them. Any realistic powered soldering iron should be fine, just don't use an acetylene torch to solder them. (actually an acetylene torch would probably vapourise the solder, anyway...) Quote Link to comment Share on other sites More sharing options...
Sasha Posted February 11, 2009 Report Share Posted February 11, 2009 I use 3rd hand to hold the pot. I always tin both, wire and pot pins. Pot pins have some more solder ...like a small ball. Than I position the wire in parallel to the pot pin and just apply some heat. Using heatshinks is highly advisable. It makes joint nice isolation and it looks good. Quote Link to comment Share on other sites More sharing options...
stryd_one Posted February 11, 2009 Report Share Posted February 11, 2009 Hard to argue with those pics! hahah thats perrrty. Quote Link to comment Share on other sites More sharing options...
Sasha Posted February 11, 2009 Report Share Posted February 11, 2009 Thanks mate. Heatshinks and cable ties are a must for any serious cabling. Even it takes much work, I find I enjoy it more doing it properly than doing it quickly - plain soldering. So, it is not so boring thing to do as it used to be. I must admit I started to use those tubes last year for the first time. Also just last year I bought my first 3rd hand. I used to do all sort of gymnastics for all my life without it. :-[ I never realized how important small things like that are and how can it ease the work and make it more enjoyable. Quote Link to comment Share on other sites More sharing options...
puddingbrumsel Posted February 11, 2009 Report Share Posted February 11, 2009 nice work sasha !over @ the tr9090 site i read you are using shielded cables. What type exactly ?? One cable 3 wires ? Where do i get those ? Quote Link to comment Share on other sites More sharing options...
Sasha Posted February 11, 2009 Report Share Posted February 11, 2009 Thanks.Yes, I`m using shielded cables. 1 cable 3 wires. It is recycled from some kind of DI brake-out box or something like that. I`ve found it on a local flea market. The brake-out looked pretty good quality with bunch of XLR connectors on it. :) Quote Link to comment Share on other sites More sharing options...
stryd_one Posted February 11, 2009 Report Share Posted February 11, 2009 Also just last year I bought my first 3rd hand. I used to do all sort of gymnastics for all my life without it. :-[ I never realized how important small things like that are and how can it ease the work and make it more enjoyable.LOL I know what you mean about the gymnastics!These were wise words; take note, newbies! Quote Link to comment Share on other sites More sharing options...
SLP Posted February 11, 2009 Report Share Posted February 11, 2009 Three Hands? Don't you have teeth? Quote Link to comment Share on other sites More sharing options...
/tilted/ Posted February 12, 2009 Report Share Posted February 12, 2009 Teeth?They're for wire stripping! Quote Link to comment Share on other sites More sharing options...
Sasha Posted February 12, 2009 Report Share Posted February 12, 2009 Exactly. :) Quote Link to comment Share on other sites More sharing options...
Guest smurky Posted February 12, 2009 Report Share Posted February 12, 2009 I use 3rd hand to hold the pot. I always tin both, wire and pot pins. Pot pins have some more solder ...like a small ball. Than I position the wire in parallel to the pot pin and just apply some heat.Thanks for the clear description (and the inspiring pics). That's by far the easiest method of those I've tried. Quote Link to comment Share on other sites More sharing options...
Sasha Posted February 12, 2009 Report Share Posted February 12, 2009 I`m glad if I helped you.Happy soldering. ;) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.