kris Posted September 26, 2009 Report Posted September 26, 2009 Hello ive finally got round to finishing the new mixer layout for my all in one midibox (see pics) im stuck as i dont know how to connect the jog shuttles heres the data sheethttp://www3.alps.com/WebObjects/catalog.woa/E/PDF/Switch/Encoder/SRGP/SRGP.PDF ive been reading this and wild weasels build log for his dennon controller, but i just cant make sense of it. There are eight connectors on each jog shuttle 1 2 3 c1 4 j2 c2 j1 on normal buttons (din) theres one ground pin and one send pin ,so if these jog shuttle act like four buttons in mios which pins are the ground and which pins are the send? any help would be appreciated as its become frustrating so near yet so far regards kris P1010028.JPGP1010050.JPGP1010028.JPGP1010050.JPG Quote
Janis1279 Posted September 26, 2009 Report Posted September 26, 2009 http://www.reloopdj.com/media/products/221546_RELOOP_SM.pdfpage 18 : part list JOG201, JOG202 - SRGPHJ,page25: the schem how to connect the jog shuttles to the 74HCT165 and 10K resistors.May be it helps.Regards, Janis Quote
Wild_Weasel Posted September 27, 2009 Report Posted September 27, 2009 c1 and c2 (common pin?) are the ground pins. all the other pins go to one input pin on the DIN module.J1 and J2 are the pins of the encoder (rotary thing in the middle) the other 4 pins belong to the shuttle ring.that's it. You need to do some programming though to make them work, f.e. with the C interface.regards,michael Quote
kris Posted September 27, 2009 Author Report Posted September 27, 2009 thanks very much for the quick reply thats exactly the information i needed ill worry about the programming when ive built it regards kris Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.