Steven_C Posted April 18, 2010 Report Posted April 18, 2010 (edited) Got the following error after I carefully followed the quickstart (http://www.midibox.org/dokuwiki/windows_toolchain_quickstart) (I simply put the folder with the motormix files here: C:\midibox_mm_v2_0e (so first line in the cmd window was: cd c:\midibox_mm_v2_0e)) C:\midibox_mm_v2_0e>SET PATH=C:\MSYS\1.0\bin;%programfiles%\SDCC\bin;%PATH% C:\midibox_mm_v2_0e>make rm -rf _output/* rm -rf _output rm -rf *.cod *.map *.lst rm -rf *.hex mkdir -p _output sh ./bin/mios-gpasm -c -p p18f452 -I./src -I ./include/asm -I ./include/share -I ./modules/app_lcd/dummy -DDEBUG_MODE=0 -DSTACK_HEAD=0x37f -DSTACK_IRQ_HEAD=0x3 3f -DDONT_INCLUDE_MIOS_ENC_TABLE -DDONT_INCLUDE_MIOS_MT_TABLE -I ./modules/mios_ wrapper modules/mios_wrapper/mios_wrapper.asm -o _output/mios_wrapper.o ./bin/mios-gpasm: line 66: gpasm: command not found make: *** [_output/mios_wrapper.o] Error 127 Then I realised I had to change the name of folder "programfiles" to "Program Files" in my entries in the CMD window. However, now I get this error:C:\midibox_mm_v2_0e>make rm -rf _output/* rm -rf _output rm -rf *.cod *.map *.lst rm -rf *.hex mkdir -p _output sh ./bin/mios-gpasm -c -p p18f452 -I./src -I ./include/asm -I ./include/share -I ./modules/app_lcd/dummy -DDEBUG_MODE=0 -DSTACK_HEAD=0x37f -DSTACK_IRQ_HEAD=0x3 3f -DDONT_INCLUDE_MIOS_ENC_TABLE -DDONT_INCLUDE_MIOS_MT_TABLE -I ./modules/mios_ wrapper modules/mios_wrapper/mios_wrapper.asm -o _output/mios_wrapper.o sh ./bin/mios-gpasm -c -p p18f452 -I./src -I ./include/asm -I ./include/share -I ./modules/app_lcd/dummy -DDEBUG_MODE=0 modules/app_lcd/dummy/app_lcd.asm -o _ output/app_lcd.o sh ./bin/mios-sdcc -c -mpic16 -p18f452 --fommit-frame-pointer --optimize-goto -- optimize-cmp --disable-warning 85 --obanksel=2 -I./src -I ./include/c -I ./incl ude/share -DDEBUG_MODE=0 src/main.c -o _output/main.o 'sh' is not recognized as an internal or external command, operable program or batch file. make: *** [_output/main.o] Error 1 C:\midibox_mm_v2_0e> This is my first attempt at compiling the app. I did not make any changes to the code, (apart from turning off the motorfaders off) just tried to compile to see if it would work. I have checked that SDCC is installed here: C:\Program Files\SDCC and MSYS is installed here: C:\msys\1.0 and GPutils is installed here: C:\Program Files\gputils I noticed that my msys folder was in fact called msys (not MSYS) so I tried changing that in the CMD window, but still no-go. Any suggestions? Cheers, Steve. Edited April 19, 2010 by Steven_C Quote
TK. Posted April 18, 2010 Report Posted April 18, 2010 Hi Steve, 'sh' is not recognized as an internal or external command, operable program or batch file.[/code] Thats strange! It seems that the shell command cannot be found anymore (it's part of MSYS), although some previous "sh" commands worked w/o error. What happens if you type: [code] sh -c "echo test" And what happens with: sh ./bin/mios-sdcc -c -mpic16 -p18f452 --fommit-frame-pointer --optimize-goto --optimize-cmp --disable-warning 85 --obanksel=2 -I./src -I ./include/c -I ./include/share -DDEBUG_MODE=0 src/main.c -o _output/main.o in the command window? Best Regards, Thorsten. Quote
Steven_C Posted April 19, 2010 Author Report Posted April 19, 2010 Cheers Thorsten, The result: C:\midibox_mm_v2_0e>sh -c "echo test" test C:\midibox_mm_v2_0e>sh .'bin/mios-sdcc -c -mpic16 -p18f452 --fommit-frame-pointe r --optimize-goto --optimize-cmp --disable-warning 85 --obanksel=2 -I./src -I ./ include/c -I .include/share -DDEBUG_MODE=0 src/main.c -o _output/main.o sh: .bin/mios-sdcc -c -mpic16 -p18f452 --fommit-frame-pointer --optimize-goto -- optimize-cmp --disable-warning 85 --obanksel=2 -I./src -I ./include/c -I .includ e/share -DDEBUG_MODE=0 src/main.c -o _output/main.o: No such file or directory Quote
Steven_C Posted April 19, 2010 Author Report Posted April 19, 2010 So I tried it on another PC, still no go. So I tried following the directions to make the path changes permanent at: http://www.midibox.org/dokuwiki/windows_toolchain_core#path_environment_variables ...and it worked! I now have a compiled .hex file :-D Time to load into the midibox to try it! Thanks for your help TK. Quote
TK. Posted April 19, 2010 Report Posted April 19, 2010 Great that you solved this :) Best Regards, Thorsten. Quote
novski Posted July 16, 2012 Report Posted July 16, 2012 i had the same problem on my Apple with Parallels XP. Writing it in to the System Path manually helped. Thanks novski Quote
Vinylrider Posted November 21, 2012 Report Posted November 21, 2012 So I tried it on another PC, still no go. So I tried following the directions to make the path changes permanent at: http://www.midibox.org/dokuwiki/windows_toolchain_core#path_environment_variables ...and it worked! I now have a compiled .hex file :-D Time to load into the midibox to try it! Thanks for your help TK. Hello i want to add something: For those user who run under windows 64bit the default installation directorie for the SDCC and the gputils is: C:\Program Files (x86)\ So you must add this line: C:\msys\1.0\bin;C:\Program Files (x86)\gputils\bin;C:\Program Files (x86)\SDCC\bin; to the path as described at the tutorial. My path for example is like this: C:\msys\1.0\bin;C:\Program Files (x86)\gputils\bin;C:\Program Files (x86)\SDCC\bin;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\EgisTec\MyWinLocker 3\x86;C:\Program Files (x86)\EgisTec\MyWinLocker 3\x64;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Common Files\DivX Shared\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Program Files\MySQL\MySQL Server 5.1\bin;C:\Program Files (x86)\MATLAB\R2009b\runtime\win32;C:\Program Files (x86)\MATLAB\R2009b\bin;C:\Program Files (x86)\Java\jdk1.6.0_20\bin;C:\Program Files (x86)\Windows Live\Shared;C:\Users\vinylrider\Downloads\android-sdk-windows\tools\;C:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\;C:\MinGW\bin\; i hope i will help the others who read this. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.