Jump to content

Bad hex for IIC midi firmware?


Altitude

Recommended Posts

So I am testing the new PICkit2 burner that I just received and it works fine with everything I have thrown at it (18F4620, 12F629, 18F452 using MBHP and other hex files) except for the IIC firmware contained in the mbhp_iic_midi_v1_0c.zip, it will not load the file stating "error reading file". If I make a new hex, I get a warning about "some configuration words not in hex file, ensure default values above are correct" (USER IDS:FF FF FF FF Checksum:1F50 Configuration: 14FE 0003) but it flashes the uC just fine. Is the hex file in the zip bad or is something else going on that I am missing?

*edit*

I also get an error when loading the hex file in P18..

*edit*

I caught smash in the chat and he tested what was in the zip and that looks fine so something is happening to the hex file. Using latest stable 7zip (checked with winrar also) and checked this on a older win2k machine and my 7 64bit machine with same results..

Edited by Altitude
Link to comment
Share on other sites

Hi

I don't understand exactly your problem but

I have burned just now four 16F88 with the last HEX file for IIC MIDI

and returned any error you enountered.I suppose it is the ultimate firmware.

I use EPIC programmer and PICPgm software.

Hope you have already solved the problem.

Regards

Antix

Link to comment
Share on other sites

no not yet. It is not something specific to the file since both you and smash are using it. However, I tried to open the hex file in another (PICprog) software suite and it also threw up an error saying that there was a error in line one related to a wrong length. I am stumped

Link to comment
Share on other sites

  • 3 weeks later...

no not yet. It is not something specific to the file since both you and smash are using it. However, I tried to open the hex file in another (PICprog) software suite and it also threw up an error saying that there was a error in line one related to a wrong length. I am stumped

you not the only one, have the same issues, it says

Error in HEX file - line 1

Invalid line length

I am using MicroBurner with the K128 burner KITSRUS.com

curious why this happens

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...