m00dawg Posted January 28, 2011 Report Posted January 28, 2011 Anyone know where I can get the machine pin strips Wilba talks about for the SID caps and LED resistors for the MB-6582 CS? I didn't use those when I built my first board and really wish I had. Since I'm likely going to build a second board I wanted to do it right :) I found these: http://www.mouser.com/ProductDetail/Aries/03-0625-71/?qs=sGAEpiMZZMs%2fSh%2fkjph1tjJZclYmfaNP4y9kNIeUeP4%3d But I'm not sure they are what I'm looking for since they have those pin things on top? The datasheet looks correct from the top but, uhh, I dunno what I'm looking for exactly :) Thanks! Quote
philetaylor Posted January 28, 2011 Report Posted January 28, 2011 Not sure about in the US but this is what I bought from Farnell in the UK: http://uk.farnell.com/jsp/search/productdetail.jsp?CMP=i-ddd7-00001003&sku=1023035 Cheers Phil Quote
m00dawg Posted January 28, 2011 Author Report Posted January 28, 2011 Aha! Fantastic! Thank you very much! Using that link I was able to grab the part number and found the same part here in the states: http://www.mouser.com/ProductDetail/Harwin/D01-9973242/?qs=ecHgFjcWJS%252bVNM5C80XwDA%3d%3d I also added it to the MB-6582 parts list page on the wiki for future reference. Thanks again! Quote
Moduku Posted January 28, 2011 Report Posted January 28, 2011 When I needed these Mouser didn't have them in stock so I bought them from Jameco: https://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&productId=78642&catalogId=10001&storeId=10001&krypto=9x3mj8umRTo2TgodMEiBMO502GUzEqddvy3pVtmSEoaUWPkWhAwS5Bu1AV89aKx9TljuppRjspTE%0D%0AOea52ylmVQ%3D%3D&ddkey=https:StoreCatalogDrillDownView Quote
Wilba Posted January 28, 2011 Report Posted January 28, 2011 You can also reuse pins from a low-profile IC socket. Quote
m00dawg Posted January 28, 2011 Author Report Posted January 28, 2011 (edited) Yeah but I didn't want to cut one of those up. Those sockets are usually more precious whole than they are in parts for me, though I have one that could meet an untimely death :) If I want to put machine strips everywhere, I need 80 of them (6 * 8 for the SIDs and 16 * 2 for the LED resistors) if my math is right. That's a lot of IC sockets to have to cut up :) Edited January 28, 2011 by m00dawg Quote
m00dawg Posted January 28, 2011 Author Report Posted January 28, 2011 Doh! Good call. Sorry about that :) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.