m00dawg Posted January 28, 2011 Report Share Posted January 28, 2011 Anyone know where I can get the machine pin strips Wilba talks about for the SID caps and LED resistors for the MB-6582 CS? I didn't use those when I built my first board and really wish I had. Since I'm likely going to build a second board I wanted to do it right :) I found these: http://www.mouser.com/ProductDetail/Aries/03-0625-71/?qs=sGAEpiMZZMs%2fSh%2fkjph1tjJZclYmfaNP4y9kNIeUeP4%3d But I'm not sure they are what I'm looking for since they have those pin things on top? The datasheet looks correct from the top but, uhh, I dunno what I'm looking for exactly :) Thanks! Quote Link to comment Share on other sites More sharing options...
philetaylor Posted January 28, 2011 Report Share Posted January 28, 2011 Not sure about in the US but this is what I bought from Farnell in the UK: http://uk.farnell.com/jsp/search/productdetail.jsp?CMP=i-ddd7-00001003&sku=1023035 Cheers Phil Quote Link to comment Share on other sites More sharing options...
m00dawg Posted January 28, 2011 Author Report Share Posted January 28, 2011 Aha! Fantastic! Thank you very much! Using that link I was able to grab the part number and found the same part here in the states: http://www.mouser.com/ProductDetail/Harwin/D01-9973242/?qs=ecHgFjcWJS%252bVNM5C80XwDA%3d%3d I also added it to the MB-6582 parts list page on the wiki for future reference. Thanks again! Quote Link to comment Share on other sites More sharing options...
Moduku Posted January 28, 2011 Report Share Posted January 28, 2011 When I needed these Mouser didn't have them in stock so I bought them from Jameco: https://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&productId=78642&catalogId=10001&storeId=10001&krypto=9x3mj8umRTo2TgodMEiBMO502GUzEqddvy3pVtmSEoaUWPkWhAwS5Bu1AV89aKx9TljuppRjspTE%0D%0AOea52ylmVQ%3D%3D&ddkey=https:StoreCatalogDrillDownView Quote Link to comment Share on other sites More sharing options...
Wilba Posted January 28, 2011 Report Share Posted January 28, 2011 You can also reuse pins from a low-profile IC socket. Quote Link to comment Share on other sites More sharing options...
m00dawg Posted January 28, 2011 Author Report Share Posted January 28, 2011 (edited) Yeah but I didn't want to cut one of those up. Those sockets are usually more precious whole than they are in parts for me, though I have one that could meet an untimely death :) If I want to put machine strips everywhere, I need 80 of them (6 * 8 for the SIDs and 16 * 2 for the LED resistors) if my math is right. That's a lot of IC sockets to have to cut up :) Edited January 28, 2011 by m00dawg Quote Link to comment Share on other sites More sharing options...
nILS Posted January 28, 2011 Report Share Posted January 28, 2011 Moved to "Parts Questions". Quote Link to comment Share on other sites More sharing options...
m00dawg Posted January 28, 2011 Author Report Share Posted January 28, 2011 Doh! Good call. Sorry about that :) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.