Guest damien Posted September 20, 2003 Report Share Posted September 20, 2003 I want to buy a Mackie LC but it's very expensive.I saw the way you've made a big clone of LC and I'm really interrested in building one.I read a lot of topic here but I'havn't seen the real price of a midibox LC, the one with 8 MF, 9 encoders, all the components, LCDs, PCBs @mikes, a pannel from schaffer with kickin' design ...What's the real price ?500euros ? 1000euros? I really don't have an idea about it !I ve got 2 weeks to make a choice between a real Mackie LC and a Midibox version.Thanks for all and keep on being so genious TK ;) Quote Link to comment Share on other sites More sharing options...
Steven_C Posted September 21, 2003 Report Share Posted September 21, 2003 my guess is around 400 to 500 euros, to build one with all options, but getting a nice front panel lazer cut might push it higher. I'm only guessing, cos I never added up all the receipts from mine! Can someone else clarify?Oh, I just remembered... TK posted an estimate on the forum somewhere... maybe 6 months ago... do a search on "estimate" or something like that... The cost also depends on either panasonic or alps motorfaders... I used panasonics, but would go for alps if I could get them... (not sure where to get them, but apparently they cost 20 euros each.) Quote Link to comment Share on other sites More sharing options...
Steven_C Posted September 21, 2003 Report Share Posted September 21, 2003 Also, if you are in a hurry for the unit, you should consider buying the commercial unit... it takes ages to build one of these babies (for me anyway) Also, you can often get less than the retail price if you pay cash to the dealer... Quote Link to comment Share on other sites More sharing options...
pilo Posted September 21, 2003 Report Share Posted September 21, 2003 mmm I have most of the part now, missing fader (I will recieve them next week) and some led + all knob (fader, enc, and switch). I'm going to spend about 200euros, without the front panel which I'm going to cut my self... but It took me a lot of time to search for the cheapest parts, and I bought parts twice (as LCD, tact switch, led...). Quote Link to comment Share on other sites More sharing options...
Guest damien Posted September 22, 2003 Report Share Posted September 22, 2003 Thanks a lot for your advices men.I will take a LC with ALPS motorfaders and not panasonic, a special pannel from schaffer and a big mac to take away :)... According to what you've said the total is near :200 euros for components 8*20 euros for Mfaders150 euros for a pannel at schaffer= 510 euros Isn't it ? Maybe I have forgoten something. The real price of a Mackie LC @ thomann is 1290euros It doesn't worth it 510 euros maybe 600 VS. 1290eurosMy choice is done :-*If I made a mistake on the price tell me more please .I wish other people who have done their  midibox LC would give me the total price they spent to own the legendary Hi-End ThorstenBOX LC :)Don't hesitate to put your bill on this topic ;)Damien Quote Link to comment Share on other sites More sharing options...
pilo Posted September 22, 2003 Report Share Posted September 22, 2003 In my opinion you made the right choice ;) it takes a lot of time to finish a box, but it's a very very cool thing to do! Quote Link to comment Share on other sites More sharing options...
Steven_C Posted September 22, 2003 Report Share Posted September 22, 2003 Frank has had success with the neew panasonic fader driver, so maybe the panasonics aren't so bad after all... (except they have no touch sensor) I am about to try the new driver too! ;D Quote Link to comment Share on other sites More sharing options...
d2k Posted September 22, 2003 Report Share Posted September 22, 2003 yes, and there's some new faders in town - mentioned these in another thread...www.alltronics.comclick on resistors link and take a peep...:) They're only $4.95 each - and it turns out they're Alps...! :PYumDan Quote Link to comment Share on other sites More sharing options...
Steven_C Posted September 22, 2003 Report Share Posted September 22, 2003 Wow! I wonder if it has a touch sensor?http://www.alltronics.com/images/22P011.jpgI like the ordering method... they cater for cheques, and you can even phone to give your credit card! (nice and safe)nice, easy site!BTW, those joystick pots are rediculously cheap! I bet we'll see a few of them appearing on midiboxes!! ::) Quote Link to comment Share on other sites More sharing options...
Guest damien Posted September 22, 2003 Report Share Posted September 22, 2003 I hope so !Not really expensive for a motorfader.I've asked to the reatailer more details about this product, I'm waiting their answer. I will give you the details in the next few days.Bye Quote Link to comment Share on other sites More sharing options...
pilo Posted September 23, 2003 Report Share Posted September 23, 2003 I mail them to know the name of the manufatcturer of those...first I didn't include the part number, so they can't answer me... then I include it they reply they have only 25 pieces of them... so I mailed them again and they just reply:alpslol! they look like alps... I hope I recieved mine shortly... Quote Link to comment Share on other sites More sharing options...
Rowan Posted September 23, 2003 Report Share Posted September 23, 2003 HiGood luck with alltronics. These are the Alps faders that I was trying to sort out for us a few months back. This company is hopless. I placed an order and was never billed, sent several emails with no reply. The model number is in the post "Alps Vs Panasonic, fight of the night". These faders are the same as used in a O2R console.Rowan Quote Link to comment Share on other sites More sharing options...
smashtv Posted September 23, 2003 Report Share Posted September 23, 2003 Hey all!Just for the record, don't confuse Alltronics with All Electronics. All Electronics has always been one of the most reliable surplus dealers I have ever dealt with, while my experience with Alltronics is the same as Rowans (in other words, a total waste of time to try to deal with them).Alltronics http://www.alltronics.com has the very small quantity of the alps motor faders that are $4.95US, and All Electronics http://www.allelectronics.com has the panasonics for $7.00US. The panasonic motor faders *may* have been used in the O2R, but I'm pretty sure the 02R has touch sensitive faders (the panasonic faders all electronics has are not!)Have fun! :)SmashTV Quote Link to comment Share on other sites More sharing options...
pilo Posted September 23, 2003 Report Share Posted September 23, 2003 mmmmm :-XI'm going to mail them right now! After my ordering on the website, I received a mail from shipping@alltronics.com that told me that they thanks me for my order and to fax them a a copy of my credit card for the UPS shipping... :-/ which I did, they reply that's everything was ok and they will destroy it, and process my order... but now I feel a little confused after reading that! I can call them but my english accent is maybe not good enough for that. :-/ Quote Link to comment Share on other sites More sharing options...
Steven_C Posted September 23, 2003 Report Share Posted September 23, 2003 ...the knobs on the O2R are plastic... touch sensitive?? Quote Link to comment Share on other sites More sharing options...
smashtv Posted September 23, 2003 Report Share Posted September 23, 2003 ...the knobs on the O2R are plastic... touch sensitive??My bad, I have been using an 02R96 at one of the local post houses for some TV work lately, and it has touch sensitive faders.Have fun!SmashTV Quote Link to comment Share on other sites More sharing options...
pilo Posted September 25, 2003 Report Share Posted September 25, 2003 mmm Dan received his order...And alltronics wrote me that they send mine tomorow... so I think now it's safe to order from them...But dan told me that there is no connection for the touche sensor... but maybe the track is here? we will see! Quote Link to comment Share on other sites More sharing options...
d2k Posted September 25, 2003 Report Share Posted September 25, 2003 Hey...but maybe the track is here?we're in luck chaps - i just opened one of the faders up and low and behold... we have a touch sensor track! :D just no pin...a result indeed eh :PPeeshDan Quote Link to comment Share on other sites More sharing options...
pilo Posted September 25, 2003 Report Share Posted September 25, 2003 great!!!no pin? mmm I'm sure there is hole or something for us here! :) lolps ; I'm the chat dan! Quote Link to comment Share on other sites More sharing options...
d2k Posted September 25, 2003 Report Share Posted September 25, 2003 no pin? mmm I'm sure there is hole or something for us here!Yup! Quote Link to comment Share on other sites More sharing options...
bosskong Posted October 3, 2003 Report Share Posted October 3, 2003 Cool... I got my 10 Alps motorfaders today. This was my first experience with Alltronics. but I'd order from them again. I was getting nervous since UPS took 9 days to get them here, but they actually shipped within 24 hours after I'd ordered and a woman on the phone actually emailed me with a tracking number like she promised she would. I've never seen a motorfader with a touch sensor. Any thoughts or tips on what would be required to get these faders working with touch sensors? Quote Link to comment Share on other sites More sharing options...
pilo Posted October 9, 2003 Report Share Posted October 9, 2003 there's no touch sensor... :( butmaybe there is a way to make this work... don't know... ??? Quote Link to comment Share on other sites More sharing options...
Nomical Posted October 9, 2003 Report Share Posted October 9, 2003 I don't know anything about motorfaders or touch sencors, but i've watched all those topics go by on the forum and this question has been posted more than once. Here's just an idea.....Aren't there any motorfaders of which the point where you attach the fader knob is connected to some extra pin? If so, wouldn't it be possible to buy/make a knob that leads/conducts elektricity/signals? Because if you would touch the knob (without moving the fader ofcourse) you would for instance shorten the pin of the knob to ground which causes a certain action or function to execute. Quote Link to comment Share on other sites More sharing options...
Steven_C Posted October 9, 2003 Report Share Posted October 9, 2003 Basta73, Ian, and myself have spent hours pondering the possibility of adding touch sensitivity to the panasonic MF's available from allelectronics, even pulling them apart, I have tried to solder to the spare (3rd)track inside, but solder will not take to it, and there isn't a wiper contact that touches this track anyway...don't pull your faders apart like we did, it is very difficult to put them back together without damaging them! and don't bend the pins either!I think the closest you'll get to touch sensitivity with these MF's will be with extra buttons near the faders, that you press at the same time as you move a fader... though I hope I'm wrong! (this is what I did on my box) Quote Link to comment Share on other sites More sharing options...
pilo Posted October 9, 2003 Report Share Posted October 9, 2003 I agree with you steven! very hard to add this... but so easy to do by the manufacturer, that I don't understand why all fader are not touch sensor? lolBy the way, they were cheap, but with no touch sensor they are just like panasonic one, a little cheaper, but... SO MUCH HARD TO ORDER THEM !lolnow time to finish this LC :) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.