lukas412 Posted February 3, 2012 Report Share Posted February 3, 2012 Ok please pardon my PSU ignorance. My goal is to run my sequencer and aout on a single psu. I have a wall wart that is labeled as +/-12 500ma. When I measure it I get right around +/-15. I used a couple regulators to bring this down to as close to +/-12 as I could get it. I was using this with my sid to drive the aout and 2044 filter. The regulators got pretty hot but it seemed to work pretty well. My question is can I safely use this supply to get +/-12 and 5v for my core? If so whats the best way to go about it. Thanks, Luke Quote Link to comment Share on other sites More sharing options...
strophlex Posted February 3, 2012 Report Share Posted February 3, 2012 I don't know about best, but this is an option i guess: http://www.midibox.org/dokuwiki/doku.php?id=northernlightx Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.