eptheca Posted February 11, 2013 Report Posted February 11, 2013 I am leaving out the EEPROM does this mean I can leave out resistors R14 and R15 and cap. C4 as well? Quote
nILS Posted February 11, 2013 Report Posted February 11, 2013 Yes, you can. No, I wouldn't. Just in case you need/want them later. That's a total of 12 cents in parts. Related quote: <SmashTV> See how 10 cents in parts have got you chasing your tail? Quote
eptheca Posted February 12, 2013 Author Report Posted February 12, 2013 OK, thanks, yes see your point :) I'm building it with 5 OUT, but only 1 IN, do I need to ground the other IN pins? I am using the small GM5 pcb Quote
Antix Posted February 12, 2013 Report Posted February 12, 2013 Hi, As you are talking about EEprom.... I have five GM5x5x5 but my windows7 see only three with every jumper settings. So, as I would to try with EEproms on every PCB , I would ask what is the part of EEprom code ( the special application ) I have to modify to have 5 different devices ? ( or better to make system see 5 different devices ) Thanks Antonio Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.