BLM 16x4 PCB

[=FFW=>]

Hi there,

 

as i decided to build the 16x4 BLM extension for the SEQV4 (see http://www.midibox.org/dokuwiki/doku.php?id=16x4blm_pcb'> here )

i wanted to know/ask if anyone else is thinking about building it at the moment and wants to hop in for ordering a PCB.

And to all who are reading this and know a place to order a cheap PCB for it - any info on that is greatly apprechiated!

 

 

Cheers,

 

Daniel

[ilmenator]

You could order at Gold Phoenix PCB - the size of the design is just below their maximum allowable single board size for their "specialprice" prototype order. The 155 sq inch panel gives you three boards - sometimes they will actually make it four, but they don't promise that so don't expect it.

[=FFW=>]

hmmmm, somehow your post implicates that you have at least "had" three PCBs ;-)

which, in turn, brings up the question: do you maybe have one spare pcb left?

( but then, you would have said that... nonetheless ;-) ).

And, how much did you shell for the pcbs you ordered?

[ilmenator]

All my protoboards are gone, sorry. If I was located in a place where shipping costs are reasonable then I'd probably do another run. However, boards that size are expensive to ship from here, and if you wanted tracking it's even worse. If you stay within single-digit quantities you will probably not find a better offer than what I pointed you towards.

[orange_hand]

Hi,

 

I have just ordered one from Goldphoenixpcb.com and they charged 103 USD (incl. shipping within the US). I guess there are other alternatives in Europe...

 

Cheers

orange