sensorium Posted March 8, 2014 Report Share Posted March 8, 2014 About 3 years ago, I was in a car accident after completing 90% of my MB-6582 build. The carpel tunnel like pain I'm living with after a shattered wrist left me incapable of doing tedious solder work. With Wilba's permission, I paid a member here to finish the job. Unfortunately, it appears the builder was a bit of a novice. Several LEDs don't light. The sustain knob doesn't change any values. When turning the filter knob, the number readings turn into random letters. But most importantly, I only seem to be getting any audio out of the SID1 output. I dealt with it for years, because I didn't have the heart to complain since it was such a kind gesture, but lately I've been itching to get this working properly. I'm still unable to do tedious work since I have (likely permanent) carpal tunnel like pain. Is anyone willing to help me out? I don't imagine it would take much time. I have spare LEDs to match if the dead ones are truly bad. I'm sure there have since been OS updates/but fixes as well. Let me know if anyone is willing to help. I will obviously pay for the bench time! Thanks in advance! Quote Link to comment Share on other sites More sharing options...
Shuriken Posted March 8, 2014 Report Share Posted March 8, 2014 I am sure that someone is willing to help. But it might be handy to reveal your location :wink: Quote Link to comment Share on other sites More sharing options...
sensorium Posted March 8, 2014 Author Report Share Posted March 8, 2014 I'm in the USA. Ohio. Quote Link to comment Share on other sites More sharing options...
C_04 Posted March 12, 2014 Report Share Posted March 12, 2014 Hi I could do that but unfortunately im in Poland. Anyway - you could check these leds that they are reverse soldered. Also if you have hc165/hc595 in sockests you may swap them (i mean hc165 with hc165 not hc165 wth hc595). Regards C_04 Quote Link to comment Share on other sites More sharing options...
Magus517707 Posted March 13, 2014 Report Share Posted March 13, 2014 Sorry to hear about your wrist. :sad: I am willing to help. Just about done with my MB6582, currently waiting on some nuts to hold my screen in. I live in Florida, so if you wanted me to work on it you would need to ship it to me. I'll do the work if you provide me with a desolder pump as payment. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.