novski Posted November 15, 2014 Report Share Posted November 15, 2014 Hi Im trying to configure my MF_NG with a .NGC file. Still i have problems with understanding the Code for combinations of different modules, ID Numbers and general. :smile: Im Using Modules i all Layouted my self and i have tested them successfully one by one. Now the time is ready to connect them together and make it complete. But i can't manage to find out how the IDs and config shold be. SO to make it not too long i made a chart of my SRIO chain I marked the unknown with a orange round "ID?" and i wold like to know what ID the next LED wold have... May somebody help me? Thanks a lot Novski Quote Link to comment Share on other sites More sharing options...
FantomXR Posted November 15, 2014 Report Share Posted November 15, 2014 Would you please post the NGC file? I'm not sure what you mean by "ID" in this context. Quote Link to comment Share on other sites More sharing options...
TK. Posted November 16, 2014 Report Share Posted November 16, 2014 I agree, not enough input to help you. Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
novski Posted November 16, 2014 Author Report Share Posted November 16, 2014 Ok. I will upload it here. Let me ask a simplified question: If i make a LED Marix and configure it like that: DOUT_MATRIX n= 1 rows=8 sr_dout_sel1=1 sr_dout_r1=2 sr_dout_r2=3 Now i connect a single LED to the next SR output (D7 i think) on SR4. Whats the code to make that single LED light up? Whats not clear to me is the next ID number after a Matrix... Thanks novski DEFAULT.NGC.zip Quote Link to comment Share on other sites More sharing options...
TK. Posted November 16, 2014 Report Share Posted November 16, 2014 You've to specify the first ID to which the LEDs should be assigned with "led_emu_id_offset=<id>" in the DOUT_MATRIX configuration. See also http://svnmios.midibox.org/filedetails.php?repname=svn.mios32&path=%2Ftrunk%2Fapps%2Fcontrollers%2Fmidibox_ng_v1%2Fcfg%2Ftests%2Frgb_1.ngc Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
FantomXR Posted November 17, 2014 Report Share Posted November 17, 2014 I think, that novski wants to connect an LED without a matrix directly to a DOUT and he wants to know which ID he has to define for the LED. Quote Link to comment Share on other sites More sharing options...
novski Posted November 17, 2014 Author Report Share Posted November 17, 2014 Well that wold be easy. Id=1 😀 No, what im searching for is the id after the Matrix. If i make a 8x16 Matrix with SR 1-3 and then connect a single direct LED to SR4, D7, the id doesn't seem to be 129. what id is it? Or is my cirquit faulty...? Best regards Novski Quote Link to comment Share on other sites More sharing options...
novski Posted November 17, 2014 Author Report Share Posted November 17, 2014 I found a part of my problems. :no: Some weeks ago i invested in a IDC Plier. That was already to late. The cable was made bevor and i don't know where i used it already without success. :pinch: Never use a normal Plier. I will come back to the Ids soon. Have to test it tomorrow. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.