MIOS Filemanager NGC, IDs, Moduls and SR numbers

[novski]

Hi

Im trying to configure my MF_NG with a .NGC file. 

Still i have problems with understanding the Code for combinations of different modules, ID Numbers and general. :smile: 

Im Using Modules i all Layouted my self and i have tested them successfully one by one. Now the time is ready to 

connect them together and make it complete. But i can't manage to find out how the IDs and config shold be.

 

SO to make it not too long i made a chart of my SRIO chain I marked the unknown with a orange round "ID?" and i wold like to know what ID the next LED wold have...

 

 

May somebody help me?

 

Thanks a lot

Novski

[FantomXR]

Would you please post the NGC file? I'm not sure what you mean by "ID" in this context.

[TK.]

I agree, not enough input to help you.

 

Best Regards, Thorsten.

[novski]

Ok. I will upload it here.

 

Let me ask a simplified question:

 

If i make a LED Marix and configure it like that:

DOUT_MATRIX n= 1 rows=8 sr_dout_sel1=1 sr_dout_r1=2 sr_dout_r2=3 

 

Now i connect a single LED to the next SR output (D7 i think) on SR4. Whats the code to make that single LED light up?

Whats not clear to me is the next ID number after a Matrix...

 

Thanks

novski

DEFAULT.NGC.zip

[TK.]

You've to specify the first ID to which the LEDs should be assigned with "led_emu_id_offset=<id>" in the DOUT_MATRIX configuration.

 

See also http://svnmios.midibox.org/filedetails.php?repname=svn.mios32&path=%2Ftrunk%2Fapps%2Fcontrollers%2Fmidibox_ng_v1%2Fcfg%2Ftests%2Frgb_1.ngc

 

Best Regards, Thorsten.

[FantomXR]

I think, that novski wants to connect an LED without a matrix directly to a DOUT and he wants to know which ID he has to define for the LED.

[novski]

Well that wold be easy. Id=1 😀

No, what im searching for is the id after the Matrix.

If i make a 8x16 Matrix with SR 1-3 and then connect a single direct LED to SR4, D7, the id doesn't seem to be 129.

what id is it?

Or is my cirquit faulty...?

Best regards

Novski

[novski]

I found a part of my problems.  :no:

Some weeks ago i invested in a IDC Plier. That was already to late. The cable was made bevor and i don't know where i used it already without success.  :pinch:

 

Never use a normal Plier.

 

I will come back to the Ids soon. Have to test it tomorrow.