powered usb hub

[electrodancer]

hi there

 

the powered usb  hub from reichtelt is not available anymore.

http://www.reichelt.de/MAXXTRO-MX-UAP/3/index.html?ACTION=3&GROUPID=6103&ARTICLE=99781&SHOW=1&START=0&OFFSET=16&

 

can anyone reccomend another suitable powered hub available at reichelt ?

would this one be okay to power a seqv4?

https://www.reichelt.com/USB2-95912/3/index.html?&ACTION=3&LA=446&ARTICLE=141073&artnr=USB2+95912&SEARCH=powered+usb+hub

Edited March 10, 2016 by electrodancer
yess

[derkollo]

Hey

the alternative you linked has 2A. In the Seq Manual it states 400-1000mA. 

So the hub should be ok to power two Seqs without any problems. :)

In my opinion the switch isn't needed. But that depends on how someone prefers his setup...

Greetz

[Hawkeye]

If you are looking for "switchability", there is also a quite cheap alternative to powered usb hubs with switches - just use usb cables with integrated power switches :-)

https://www.adafruit.com/products/1620

(These are also available with a mini/micro usb socket)

Then you can power from any (chinese) USB wall wart adapter (rated at 5V/1A) you may have lying around...

Not that this is the recommended way to obtain clean 5V, but it is cheap! :-)

Many greets,

Peter

[Keeze]

You could consider https://www.sossolutions.nl/hub-met-schakelaars If you want to source it in Holland.

[electrodancer]

thanks for the replies guys !

 

[mfk]

https://www.reichelt.com/USB-Hubs/LOGILINK-UA0148/3/index.html?&ACTION=3&LA=2&ARTICLE=127214&GROUPID=6103&artnr=LOGILINK+UA0148
works well