moebius Posted February 11, 2005 Report Share Posted February 11, 2005 I'm hoping this is going to be a sticky topic ;)I'll edit this post or delete it, if it's not needed anymore - all this information is gathered from the forum, and shamelessly copied here - You're welcome to present it in a better formBourns PEC11-series detented encoders(From SmashTV)Encoder mode: "DETENTED2"Pinout: (http://www.avishowtech.com/mbhp/images/encspecs17.gif)Note: the rightmost picture is "top down" (as seen from the top of the encoder looking down to the shaft)pin "A" goes to D1pin "C" goes to Vspin "B" goes to D0(This means that, encoder C pin is "common". Encoder B pin goes to lower numbered DIN pin (of two pins assigned to that encoder) and encoder A pin to higher numbered DIN pin.)the detent can be removed-----Thanks go to: mandingo: http://69.56.171.55/~midibox/forum/index.php?topic=3843.msg25094#msg25094jdutcher: http://69.56.171.55/~midibox/forum/index.php?topic=3911.msg25766#msg25766xcoulonx: http://69.56.171.55/~midibox/forum/index.php?topic=3299.msg23699#msg23699Now - does anyone want to reveal the specs of the encoders from VOTI? What about different ALPS types?contributions more than welcome ;)/edit corrected link for moved page Quote Link to comment Share on other sites More sharing options...
illogik Posted March 11, 2005 Report Share Posted March 11, 2005 Right, better late then never...Specs on VOTI (www.voti.nl) encoders;M-SW-ROT, detented rotary encoder, price EUR 1,19Encoder mode: "DETENTED2" (not 100% sure will verify later)pinout; http://www.voti.nl/docs/rotary-encoder.jpgif you view the encoder from the top with the pins pointing towards you;left pin goes to D1 (highest numbered din pin)middle pin goes to D0 (lowest numbered din pin)right pin goes to Vsthe detent can also be removedcheers, marceledit// oh dear :-[ just found out the pinout i gave is wrong! been standing here for over a year now, so if any of your boxes work backwards you know who's to blameit's fixed now Quote Link to comment Share on other sites More sharing options...
nebula Posted January 2, 2008 Report Share Posted January 2, 2008 This is reference material, so appropriately it is in the Wiki - http://www.midibox.org/dokuwiki/encoder_specifications?s=encoderCan we "un-sticky" this topic? Further contributions to this should be made in the Wiki. Quote Link to comment Share on other sites More sharing options...
ganchan Posted January 2, 2008 Report Share Posted January 2, 2008 i think this would be addedhttp://www.soundwell-cn.com/ebusiness/en/product_detail.asp?catalogid=4&productid=65 Quote Link to comment Share on other sites More sharing options...
nebula Posted January 2, 2008 Report Share Posted January 2, 2008 yup, i already added it :) Quote Link to comment Share on other sites More sharing options...
stryd_one Posted January 4, 2008 Report Share Posted January 4, 2008 Uhm is it just me or is this topic already unsticky? Quote Link to comment Share on other sites More sharing options...
nebula Posted January 6, 2008 Report Share Posted January 6, 2008 Smash beat you to the punch :)Nice to see you back! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.