TK. Posted January 24, 2003 Report Share Posted January 24, 2003 Finally the redesigned MIDIbox Plus PCB and the appendant firmware can be downloaded from the "MIDIbox Plus->Design" page. For users who want to upgrade their existing box (it makes sense if you noticed performance problems with the integrated MIDI merger): just add an additional connection between Pin #23 of the PIC and the R/W input of your LCD and burn the new firmware into your PIC. People who don't use a display should upgrade, too - they don't have to take care about the hardware mod.Best Regards, Thorsten.P.S.: Mike will sell this PCB for just 6 Euros in the next days :-) Quote Link to comment Share on other sites More sharing options...
smitch Posted January 25, 2003 Report Share Posted January 25, 2003 hey,I carnt download the new pcb file, is it missing or is it just me.Same goes for the component list.ThanksMitch Quote Link to comment Share on other sites More sharing options...
TK. Posted January 25, 2003 Author Report Share Posted January 25, 2003 fixed.Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
bosone Posted February 12, 2003 Report Share Posted February 12, 2003 i had no problems with my current midibox 16 firmware... if i upgrade to next version i have to change the hardware connections like you said, i suppose? Quote Link to comment Share on other sites More sharing options...
TK. Posted February 17, 2003 Author Report Share Posted February 17, 2003 Hi Matteo,since your MIDI In is working, you don't need to exchange the CNY17-II by a 6N138. Only the additional line to the LCD is required. And the new firmware of course. Maybe you will notice a better performance with your breath controller, since LCD accesses don't slow down the ADC driver anymore.Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.