Help
He will provide some sound patches in the future. :)
Page 1 of 1
MIDIbox of the week (Mini MIDIbox SID of Arto)
Rate Topic:
#1
- MIDIbox Guru
-
- Group: Administrators
- Posts: 11,146
- Joined: 01-January 01
- LocationGermany
Posted 02 February 2003 - 00:15
This time from Arto/Finland.
He will provide some sound patches in the future. :)
He will provide some sound patches in the future. :)
#2
- MIDIbox Tweaker
-
- Group: Members
- Posts: 370
- Joined: 01-September 02
- LocationNew Zealand
Posted 02 February 2003 - 13:00
nice minimal design!
LO
LO
#3 Guest_rebelrob_*
Posted 24 May 2003 - 17:13
Very compact and fresh... Like the art next to the LCD screen.
Good work buddy! ;D
#4
- MIDIbox Newbie
-
- Group: Members
- Posts: 51
- Joined: 14-March 05
- LocationHelsinki
Posted 17 August 2005 - 10:46
Finally managed to add the minimal control interface for this one.. Ended up sanding/repainting the case on the same go since there was some pretty ugly file marks next to the screen cutout (was too lazy to sand them away when initially making the box). Pics:
Fitting out the board/measuring buttons
http://www.kewlers.s...ntrol_Assy1.JPG
Completed board
http://www.kewlers.s..._Assy_Upper.JPG
http://www.kewlers.s..._Assy_Lower.JPG (encoder wiring is the wrong way around in this one)
http://www.kewlers.s...ntrol_Assy2.JPG
The final product
http://www.kewlers.s...diy/SIDV2_1.JPG
http://www.kewlers.s...diy/SIDV2_2.JPG
http://www.kewlers.s...diy/SIDV2_4.JPG
And yeah, I should REALLY look into programming some patches :)
Ta ta,
.Arto.
Fitting out the board/measuring buttons
http://www.kewlers.s...ntrol_Assy1.JPG
Completed board
http://www.kewlers.s..._Assy_Upper.JPG
http://www.kewlers.s..._Assy_Lower.JPG (encoder wiring is the wrong way around in this one)
http://www.kewlers.s...ntrol_Assy2.JPG
The final product
http://www.kewlers.s...diy/SIDV2_1.JPG
http://www.kewlers.s...diy/SIDV2_2.JPG
http://www.kewlers.s...diy/SIDV2_4.JPG
And yeah, I should REALLY look into programming some patches :)
Ta ta,
.Arto.
#5
- MIDIbox Newbie
-
- Group: Members
- Posts: 73
- Joined: 28-June 03
- LocationGothenburg, Sweden
Posted 24 August 2005 - 14:01
hehe... minimal.
#6
- MIDIbox Guru
-
- Group: Administrators
- Posts: 11,146
- Joined: 01-January 01
- LocationGermany
Posted 25 August 2005 - 19:09
Quote
And yeah, I should REALLY look into programming some patches :)
I hope it! :-)
Well done!
Best Regards, Thorsten.
#7
- MIDIbox Newbie
-
- Group: Members
- Posts: 51
- Joined: 14-March 05
- LocationHelsinki
Posted 15 February 2010 - 13:41
Some bla-bla about the construction of this synth is now available at my newly established DIY blog..
http://amazingdiy.wo...midibox-sid-v1/
http://amazingdiy.wo...midibox-sid-v2/
..will take quite a while to bridge the gap all the way to present day, but I'm working towards it ;)
http://amazingdiy.wo...midibox-sid-v1/
http://amazingdiy.wo...midibox-sid-v2/
..will take quite a while to bridge the gap all the way to present day, but I'm working towards it ;)
Share this topic:
Page 1 of 1