dengel Posted July 5, 2007 Report Share Posted July 5, 2007 Pictures below...With the birth of my baby 6 months ago, I just have no time to devote to the project. I would like to sell my PCB's (Constructed from full-parts kits from Smash) as well as my purchased pots, encoders, and knobs (GREAT KNOBS) for under my cost.What I would be selling are :1 Core module, flashed with m64 standard code4 constructed and tested AIN modules2 DIN Modules, 1 Constructed and 1 not yet built24 small pots (see pix) with24 machined aluminum set-screw (Ekler-type) knobs1 rotary endless encoder w/ set screw knobsome inexpensive 45mm faders (I think I have 6)some miscellaneous small parts and wire (basically whatever I have lying around related to the project).1 m-audio Uno midi interface (ideal for a mobile setup; very small and USB powered)Adobe Illustrator files of the faceplate art (if the person wants it).I'd like to sell it for $100, which is essentially what I paid for just the PCB stuff from SmashTV plus about $25 more. The knobs were 2 bucks apiece alone, the pots a buck 50, the midi interface (a m-Audio Uno) was $40, etc etc etc....In my sale notice, I would like to make clear that I will only sell the item to Midiboxers who had already worked with the platform, and that it is not a completed project (although I did play a couple times with it in the knob-only prototype mode shown).It would be a great start to a new m64 project for an established Boxer who didn't want to solder everything themselves yet again, and wanted some (very nice) hardware to go along with the boards.Pictures:Not shown, DINs, Misc parts, Uno. Quote Link to comment Share on other sites More sharing options...
dengel Posted July 5, 2007 Author Report Share Posted July 5, 2007 thanks, TK, for moving this.Also, I'll send the power supply as well.Also, that price is shipped, BTW.EDIT: I am so sorry that I forgot what an international community Midibox is. Apparently, shipping internationally is insane. Shipping was gonna be less than 10 bux domestic, but nearly 40 is a bit of a hard pill to swallow.I found the cheapest to the Netherlands ('Best Country Name Ever' Award, BTW) was $34.20 for USPS. :o. UPS, DHL, etc were insane; over $100 in each case. Quote Link to comment Share on other sites More sharing options...
NorthernLightX Posted July 5, 2007 Report Share Posted July 5, 2007 I would be interested in the Core and the DIN modules. I you consider selling these apart from the rest just give me a PM.Cheers, Alex. Quote Link to comment Share on other sites More sharing options...
Wisefire Posted July 7, 2007 Report Share Posted July 7, 2007 ill buy the lot.. and NLX.. we'll make a deal about the core and dins.. Quote Link to comment Share on other sites More sharing options...
NorthernLightX Posted July 7, 2007 Report Share Posted July 7, 2007 Fine with me ;) Quote Link to comment Share on other sites More sharing options...
dengel Posted July 8, 2007 Author Report Share Posted July 8, 2007 Thanks, guys... Still trying to determine the best/least expensive method to ship this to you. Any suggestions are welcome. Quote Link to comment Share on other sites More sharing options...
dengel Posted July 14, 2007 Author Report Share Posted July 14, 2007 Wise and NLX...It looks like the cheapest shipping will be $34.20 USD, USPS (which is what Smash uses).If I paid $15 of that, would you be interested still? Quote Link to comment Share on other sites More sharing options...
Wisefire Posted July 16, 2007 Report Share Posted July 16, 2007 we are interested..ill PM you.. Quote Link to comment Share on other sites More sharing options...
DrBunsen Posted July 17, 2007 Report Share Posted July 17, 2007 There's an $11 USPS flat rate worldwide satchel. It's 9.5"x12.5", flat (like an envelope) and rated to four pounds weight. I've squeezed many components into these to save on shipping to Australia. Bubblewrap the components and put some wide clear tape over the bits where it looks like it might tear. Quote Link to comment Share on other sites More sharing options...
Wisefire Posted July 18, 2007 Report Share Posted July 18, 2007 think you can squeeze it in there Dengel? Quote Link to comment Share on other sites More sharing options...
dengel Posted July 26, 2007 Author Report Share Posted July 26, 2007 think you can squeeze it in there Dengel?I'll see if I can. Hell, if I have to do 2 of them it is still cheaper. BTW, the payment cleared yesterday, so I'll get the stuff ready and ship it out! Quote Link to comment Share on other sites More sharing options...
Wisefire Posted August 11, 2007 Report Share Posted August 11, 2007 received the goods, in a great big box. that was really fast Dengel.. A++!NLX, please contact me.. thnx. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.