Guest Trenton Posted May 14, 2003 Report Share Posted May 14, 2003 Ahoy!! from sunny South Africa.New to your Forum. Because of the parts promlem in S.A is it posible to use mouse wheels with led level indicators instead of faders? Faders are imposible to find.Strangely, other parts are very cheap.PCB also cheap ei: 0.6c/us per cm2Regard from Africa 8)Trenton Quote Link to comment Share on other sites More sharing options...
Guest Trenton Posted May 14, 2003 Report Share Posted May 14, 2003 Ahoy!! from sunny South Africa.New to your Forum. Because of the parts promlem in S.A is it posible to use mouse wheels with led level indicators instead of faders? Faders are imposible to find.Strangely, other parts are very cheap.PCB also cheap ei: 0.6c/us per cm2Regard from Africa 8)Trenton Quote Link to comment Share on other sites More sharing options...
xt-rem Posted May 14, 2003 Report Share Posted May 14, 2003 i think no :(Mouse wheels sends impulses (one or zero) and not a changig voltage like an fader.by! Quote Link to comment Share on other sites More sharing options...
xt-rem Posted May 14, 2003 Report Share Posted May 14, 2003 i think no :(Mouse wheels sends impulses (one or zero) and not a changig voltage like an fader.by! Quote Link to comment Share on other sites More sharing options...
LO Posted May 14, 2003 Report Share Posted May 14, 2003 You could mod the mouse wheels to act like encodersDo a search on this on the forum D2K has done this! Quote Link to comment Share on other sites More sharing options...
LO Posted May 14, 2003 Report Share Posted May 14, 2003 You could mod the mouse wheels to act like encodersDo a search on this on the forum D2K has done this! Quote Link to comment Share on other sites More sharing options...
msi Posted May 18, 2003 Report Share Posted May 18, 2003 Would it be possible to mount 10k pots horizontally and attach some kind of wheel similar to a mouse wheel on the Pot's post. That in conjuction with a row of leds from the DOUT modual could then be used to show the fader position. Touch sensitivity could then be added the same way as a mouse wheel can function like a third button. The touch sensitivity part would require some skill I think, but the the pot alone would be easy to wire up.William Quote Link to comment Share on other sites More sharing options...
msi Posted May 18, 2003 Report Share Posted May 18, 2003 Would it be possible to mount 10k pots horizontally and attach some kind of wheel similar to a mouse wheel on the Pot's post. That in conjuction with a row of leds from the DOUT modual could then be used to show the fader position. Touch sensitivity could then be added the same way as a mouse wheel can function like a third button. The touch sensitivity part would require some skill I think, but the the pot alone would be easy to wire up.William Quote Link to comment Share on other sites More sharing options...
Steven_C Posted May 18, 2003 Report Share Posted May 18, 2003 William, I like your diagram! Though I can't see any benifit over using standard pots, which work on absolute values, mounted normally. Or just mail order some slider pots. Best of all is motorised pots, or endless rotary encoders. (a 10k pot is not an endless rotary encoder device) Using mouse encoders in the way you have described is a good idea in concept, though I for one would never have the time or patience to build such a design! (and I'm a metalworker by trade!) good luck, welcome to our little world of diy midi! bye, from Steve Quote Link to comment Share on other sites More sharing options...
Steven_C Posted May 18, 2003 Report Share Posted May 18, 2003 William, I like your diagram! Though I can't see any benifit over using standard pots, which work on absolute values, mounted normally. Or just mail order some slider pots. Best of all is motorised pots, or endless rotary encoders. (a 10k pot is not an endless rotary encoder device) Using mouse encoders in the way you have described is a good idea in concept, though I for one would never have the time or patience to build such a design! (and I'm a metalworker by trade!) good luck, welcome to our little world of diy midi! bye, from Steve Quote Link to comment Share on other sites More sharing options...
pay_c Posted May 18, 2003 Report Share Posted May 18, 2003 A little disadvantage (also its some good idea):You cant turn from 0 to 127 with one touch... goodbye, fast cutoff and reso playing time. Quote Link to comment Share on other sites More sharing options...
pay_c Posted May 18, 2003 Report Share Posted May 18, 2003 A little disadvantage (also its some good idea):You cant turn from 0 to 127 with one touch... goodbye, fast cutoff and reso playing time. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.