d2k

Found this site for company in japan: http://www.ipishop.com/usb.html They sell the AN2131SC for 1,200 YEN which is about 9EU and I believe there is NO minium order...;) HTH

great... ;D thanks again

great... ;D thanks again

Just read the latest news, great stuff fella ;D Hmmm, so goin from my prior diagram can i make everything there except the 3rd core (running the midimon f/w - which was suggested could run the graphics LCD) and then wait for the NG for the graphics LCD implementation to use with the LC f/w? Will it be okay to mix the current mbhp modules I'm using in my design (mb64/16e(LC)) and then use the new NG f/w in a forthcoming PIC18F core for the graphics LCD? ??? Dan

Just read the latest news, great stuff fella ;D Hmmm, so goin from my prior diagram can i make everything there except the 3rd core (running the midimon f/w - which was suggested could run the graphics LCD) and then wait for the NG for the graphics LCD implementation to use with the LC f/w? Will it be okay to mix the current mbhp modules I'm using in my design (mb64/16e(LC)) and then use the new NG f/w in a forthcoming PIC18F core for the graphics LCD? ??? Dan

Hi.. First off, the most recent version of eagle is 4.09r2 - not sure of the updates but u may wanna get it... To open the .brd files goto: File > Open and select 'board' from the list of filetype options. Then direct the browser to the mhbp_core_v2.brd file. Best...

Hi.. First off, the most recent version of eagle is 4.09r2 - not sure of the updates but u may wanna get it... To open the .brd files goto: File > Open and select 'board' from the list of filetype options. Then direct the browser to the mhbp_core_v2.brd file. Best...

Thanks... That makes sense...;)

Thanks... That makes sense...;)

Thanks again T...; WR to the Bankstick situation - what would you suggest for that config then...? You first said to have it feeding of the MB64 core, but as this has no LCD how would i see what i'm saving...have i missed summin sumwhere... ???. Everypost - another surprise ;) So standard 10k linear faders will operate as motorfaders...???:) I thought motorfaders needed a motor to drive them - hence 'motor', again - mebbe i've missed summin :P Rspx Dan

Thanks again T...; WR to the Bankstick situation - what would you suggest for that config then...? You first said to have it feeding of the MB64 core, but as this has no LCD how would i see what i'm saving...have i missed summin sumwhere... ???. Everypost - another surprise ;) So standard 10k linear faders will operate as motorfaders...???:) I thought motorfaders needed a motor to drive them - hence 'motor', again - mebbe i've missed summin :P Rspx Dan

This sounds like a great idea...:)! It'd be a serious looking dashboard that's f'sho, keep us posted on how u get on!! Peace

This sounds like a great idea...:)! It'd be a serious looking dashboard that's f'sho, keep us posted on how u get on!! Peace

At the moment, you would need 2 cores (one with 16E f/w for the encoders, one with MB f/w for the pots)... Wait a while for the NG rollout, you will be able to have all on 1 core...;) Check the post in the latest news forum... Best... Dan

At the moment, you would need 2 cores (one with 16E f/w for the encoders, one with MB f/w for the pots)... Wait a while for the NG rollout, you will be able to have all on 1 core...;) Check the post in the latest news forum... Best... Dan

okay, so here is the updated diagram for my MB... http://www.notapplicable.co.uk/d-mbhpv2.jpg Questions: 1. I'm guessing with the bigger graphic display the power requirement is gonna increase, what would be the recommended wall adaptor for this config... 2. What should i be looking for controller/config wise for the graphic LCD? - i know the normal LCD used the HD44780 set... 3. With the bankstick on the MB64 core as you suggested, how would saving banks etc work-out if the LCD is connected to the MIDImon core? Is the LCD able to display info from multiple cores...? I only really need the CC/Note assignment to the pots/buttons on the MB64 core to be set and left as I have a enviro in Logic to take care of the mapping. The MB16E core would run the LC f/w as stated, 8 of the encoders acting as the v-pots and the last one as the transport/scrubb dial. Buttons would just be assigned to LC functions... Am I there yet...;) Best... Dan

okay, so here is the updated diagram for my MB... http://www.notapplicable.co.uk/d-mbhpv2.jpg Questions: 1. I'm guessing with the bigger graphic display the power requirement is gonna increase, what would be the recommended wall adaptor for this config... 2. What should i be looking for controller/config wise for the graphic LCD? - i know the normal LCD used the HD44780 set... 3. With the bankstick on the MB64 core as you suggested, how would saving banks etc work-out if the LCD is connected to the MIDImon core? Is the LCD able to display info from multiple cores...? I only really need the CC/Note assignment to the pots/buttons on the MB64 core to be set and left as I have a enviro in Logic to take care of the mapping. The MB16E core would run the LC f/w as stated, 8 of the encoders acting as the v-pots and the last one as the transport/scrubb dial. Buttons would just be assigned to LC functions... Am I there yet...;) Best... Dan

See : http://www.ucapps.de/midibox_sid/sid_cc_implementation_chart.txt You can have alot more than 29 ;)

See : http://www.ucapps.de/midibox_sid/sid_cc_implementation_chart.txt You can have alot more than 29 ;)

hmm, not sure what's happening there with the text, but the links do works...

hmm, not sure what's happening there with the text, but the links do works...

;P ...and here they are: http://www.recording.org/cgi-local/ubb/ultimatebb.cgi?ubb=forum;f=6;hardset=;start_point=;DaysPrune= http://www.diyaudio.com/index.php?s=a7e74548ae604638c58e29fddc892f25 HTH... Dan

;P ...and here they are: http://www.recording.org/cgi-local/ubb/ultimatebb.cgi?ubb=forum;f=6;hardset=;start_point=;DaysPrune= http://www.diyaudio.com/index.php?s=a7e74548ae604638c58e29fddc892f25 HTH... Dan

Don't have an answer to question fella, but these two forums will do prolly: they are excellent resources...as is this...!!

Don't have an answer to question fella, but these two forums will do prolly: they are excellent resources...as is this...!!