-
Posts
256 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by sebiiksbcs
-
-
how mean!
-
-
I've decided this is the worst song ever. Yes, that's a really big call, I know...
I prefer microtonic Van Halen (http://createdigitalmusic.com/2007/10/18/onstage-tech-disasters-van-halen-goes-microtonal/)
to those "doggs".
Can't I insert <a href="...>-kinda links here?
-
haha,
there was a vivid discussion if a sample rate conversion of the synth part made up the ca. one semitone difference.
people at youtube fanatically started "proving" or "disproving" that, like if there was nothing worse in their lives than van halen playing a semitone down.
of course it still sounds awful, but i'd prefer a detuned van halen to... say many other musicians out there.
-
Damn that sucks. the whole device looked so fun!
-
[commercial]
Ich habe die Displays mittlerweile ausprobieren können, sie laufen super! Newbies, ich kann die LCDs nur empfehlen. ;D Der Preis ist auch sehr gut.
[/commercial]
-
Von Reichelt --> LCD 404B BL
http://www.flickr.com/photos/disgustingpie/sets/72157603629940534/
(Zeichen sehen auf den Fotos etwas blass und unklar aus)
VB EUR 39,-
Mit stabilen angelöteten Anschlüssen für Sofort-Spaß mit Core
-
What I like about the Remote SL mapping is that you can quickly switch between volume, pan, and all sends all on 8 knobs (or sliders), and that in banks of 8 tracks. Then you have 8 Encoders for all your device banks.
LC is more powerful, Remote SL is easier, doable on MB64(E) or for smaller performance controllers, probably without need for a (big) display.
-
I love this forum!
-
Ich habe eine Box mit 4 Stück 2x16 Displays (LCDs ohne Anschlussblöcke) als Erweiterung für meine LC16 gebaut, damit man den Platz besser ausnützen kann. (Photos sind hier: http://www.docstudios.de/MBLCXT.htm - allerdings noch im Rohzustand, ohne Displaytreiber)
Das ist genau "what I'm up to"! Hast du für die 74HCs SMD-Teile benutzt?
Auch scheint jeder Motorfader einen eigenen Regulatorschaltkreis zu haben, sind diese mit TC4427s in SMD-Form gebaut?
Hättest du etwas dagegen, das PCB-Layout einsehen zu lassen? Ich möchte lernen.
-
Bin kein Experte, aber wenn man sich den Datasheet ansieht, findet man eine LED-Matrix für die 31 LEDs. Wäre das am Beispiel der Midibox LC mit 8 dieser Encoder dann nicht wie eine (DOUT)LED-Matrix die 8 LED-Matrizen steuert?
Nebenbei, könnten nicht nur 16 der 31 LEDs genutzt werden?
-
8 ALPS Motorfaders - RSA0N11M9
100mm
10k linear
with Touch Sensor
Bought at Reichelt.de. Reichelt-number is RSA0N11M9-LIN10K (Datasheet available)
Were meant for a Midibox LC. Since I will move abroad soon, I sell them. There is a 75% finished LC construction too, if anybody likes to overtake, infos and pics via PM. I would love to see the faders move in someone's box some day, or even get my LC finished and used.
8 motorfaders for 19 € per piece, together 152,- €. Free shipping to Germany, other countries cheap. I don't care about some € more or less.
The faders are new and unused. I also have 8 white Knobs that fit,
KNOPF 18,5X1,5WS at Reichelt.de
can add them for 2 €.
IN THE EARLIER GERMAN POST, SCREAMING RABBIT INFORMED ME THAT WITH THESE KNOBS THE TOUCH SENSORS DO NOT WORK, SINCE THE KNOBS DO NOT CONDUCT. I didn't know that, but hey... I believe him.
Cheers!
-
Leitende Faderknöpfe hör ich zum ersten Mal! Ich wusste das nicht, wie funktionieren die? Die LC ist ja so in bits n' peaces dokumentiert, da hab ich dies wohl übersehen.
-
ALPS Motorfader
100mm
10k linear
mit Touch Sensor
8 Stück
Gekauft bei Reichelt. Reichelt-Nummer: RSA0N11M9-LIN10K (Datenblatt auch dort)
Für Midibox LC gedacht. Da ich bald ins Ausland umziehe, gebe ich die Teile wieder ab. Ich habe auch eine 75% LC-Baustelle, falls sie jemand übernehmen möchte, Fotos und Infos per PM.
8 Fader für 19 € das Stück, zusammen 152,- €. Versand in D kostenlos.
Fader sind neu und unbenutzt, ungelötet usw. Habe auch 8 passende weiße Knöpfe dafür, neu,
Nr. KNOPF 18,5X1,5WS,
kann ich für 2 Euro dazugeben.
Cheers!
-
Ich würde auch 2 nehmen. Müssten ja noch welche verfügbar sein.
-
-
Der Thread ist zwar steinalt - aber die gleiche Frage würde ich auch gerne stellen.
Kann mir jemand einen PIC brennen? Und zwar will ich mir den Brenner8 von sprut.de bauen und dazu brauch ich einen programmierten PIC. (Eigentlich schon blöd - um PICs selber brennen zu können braucht man nen gebrannten PIC ;D )
Der Link zur Firmware wäre dieser hier http://sprut.de/electronic/pic/projekte/brenner8/b8_fw.zip (mit dem Bootloader)
Achso, es handelt sich übrigens um einen 28-Füßler, genauer gesagt um den PIC18F2550 - den würde ich dann zuschicken (und nen kleinen Obolus ;) )
MfG
Genau das Selbe mache ich auch... Ich baue einen Brenner 8P, und will nicht mit nem eigenen Breadboard den PIC18F2550 brennen, um den Brenner benutzen zu können...
Also, es handelt sich übrigens um einen 28-Füßler, genauer gesagt um den PIC18F2550 - den würde ich dann zuschicken (und nen kleinen Obulus ;) ) Ganz meine Rede.
Kann jemand den PIc für mich brennen? Vielen DANK!
-
What was this law about increase in transistors every 4 years like? Moore's law?
-
was the 'track' / 'remote' thing i said right? i am curious...
-
- so you do want the midibox to work with note on/off messages? if not, you could easily use control change messages instead.
- if you need note on/offs to map to anything, then sure, just send on a different channel, or configure different channels for your tracks in ableton.
- aren't there a 'track' and a 'remote' switch for each device in the midi preferences? I think 'track' is for midi notes of the particular device to record melodies, and 'remote' allows to use the note messages of the device to be mapped. I haven't got ableton here, so tell me if I am wrong!
-
I'm going to go off topic here for a minute... I'm looking at travelling to China next year for a few weeks, have you any problems if I quiz you for none midi-box related information?
G
Any questions welcome! Where are you going?
"Hello! Where are you coming from?" (Frequent question by Chinese who want to chat in English, in subways etc. Depends on the city though)
-
do you study chinese martial arts too?
No, but Calligraphy! :D
-
Anyone ever been following a link for a part and discovered infos are only available in Chinese?
Hereby I officially offer my good Chinese skills to this forum to find out what's going on on datasheets, or maybe even writing parts requests etc. to companies, or whatever could be needed to help.
??
Akcija
-
Anyone ever been following a link for a part and discovered infos are only available in Chinese?
Hereby I officially offer my Chinese skills to this forum to find out what's going on on datasheets, or maybe even writing parts requests etc. to companies, or whatever could be needed to help.
I am gonna post this in Miscellanous too.
??
Akcija
Great Shows of electronic artists
in Miscellaneous
Posted
Apparat's record release in a big theater in Berlin 2007. I stepped back to the seats and recorded it with my cam. It really couldn't capture the atmosphere. But that was my best concert ever.
This one I haven't been at, but I like the part of the music and the way he seems to grab his cigar in sync as if it was part of his MIDI controller.