chuck

you can get needles and syringes on ebay.

Thanks I appreciate the SmashTV service. Chuck

Thanks. The link on the Core Module page is broken. The link you provided works great. Chuck

The site is gone. Does anyone have the pinouts for the SmashTV Core Module? Thanks

If you go to the top right corner of the page and hit the England flag it will be in English. But shipping to the states is rather high. I bought two with a bunch of key caps. Plus the Euro rate suck right now. I think I paid around 114 euros... Thats $154. $60 was shipping.

I figured it out, and bought two. Thanks for the tip. You are the man. Chuck

Dang, thats cool. I can't read that language. How much is it? Which button do I push to order it? Chuck

I search and couldn't find this anywhere. I also searched the internet for hour today and only got close. What I'm looking for is a switch assembly, to control cursor movement. With Left, Right, Up and down arrows and a Enter button in the center. I'd like to mount it next to the LCD, so I can make selections off a menu on the LCD. Has anyone seen such an assembly or am I going to have to make my own with five tactile switches? Extra buttons would be ok.

I use ExpressPCB. I wouldn't say they are cheap, unless you're doing something small. But the service is great. They helped me through my first board. The holes are all thru-plated.

Thanks all. I guess I just misunderstood the pin chart at http://www.midibox.org/dokuwiki/doku.php?id=din_dout_pintable I thought I was going crazy there for a moment. Appreciate the assistance. Chuck

Ah, I think thats my issue. I would have expected bit 0 to go to D0. Does that mean bit 7 goes to D0?

I'm using the SmashTV board. I'll try the debug tonight, thanks.

I'm sorry I don't understand the reference. Still confused. But thanks.

Did you try uploading mios again?

I'm a little confused, I was hoping someone could clear something up. When I look at the DOUT pinout chart at http://www.midibox.org/dokuwiki/doku.php?id=din_dout_pintable the pins on the registers are backwards from what I get in reality. For example, I have an LED on register 4, pin D6. The chart shows this should be pin 30 hex number 0x1e But to turn this pin on, I need to use pin 25, hex number 0x19. This is exactly backwards. What could I be doing wrong? Is it possible that I installed a component backwards, such as the crystal? Thanks Chuck