Enth

Two CEM3372 preliminary sold, 4 left.

Hey, yeah, it's okay (at least afaik) to register just for the fleamarket. I'll email/pm you!

The SSM2044s have been sold. There's one SSM2044 PCB still left if there's any interest?

Not without removing "noise lock protection". You might want to give this old thread a read: http://midibox.org/forums/topic/12988-combined-waveforms-with-noise-uses-for-waveform-fragments/

Alright. I've PM'ed you for details!

Added more chips.

Hey, sorry for late reply. As there hasn't been much interest on this I could sell the chips one by one. Edit: and yeah, 25eur for one.

Dropped the price.

In all seriousness, very slick!

8x 6582A sold. Got all the CEM 3372's left if anyone is interested.

Hey, sorry for late reply. They still are. I'll message you.

Selling: 6x 4x CEM3372 - 25 EUR / pc 2x CEM3379 - 25 EUR / pc 4x SSM2044 - 20 EUR / pc 2x 1x SSM2044 PCB - 5 EUR / pc (By Seppoman) The SSMs are used. Buy two of them and you can also buy the PCB if you want. If/when the chips are sold without the PCB I can sell them separately as well. The CEMs were bought as NOS but I never got around to put them to use. If you find a problem with them I'll refund the money when returned. Ships from Finland.

PM sent. Better late than never eh? :p Edit: aaaaaand paid. Thank-y you-u very-y mucho :)

So, I was moving around the mb-6582 with the power on, the front panel is kinda loose, just rests on top over the mainboard so there's bound to be some problems with moving parts inside and what not. Then, for some reason, it started formatting bankstick F. After restaring,, it went and formatted the essembles bankstick too. Any way to recover the patches from bank F? Ironically I happen to have backups of all the other banksticks I've made earlier of that but not of that particular one. ;_; In future, if I happen to run into the same situation (because I've been lazy and not fixed the actual cause yet), should I just abort the formatting with reset? Would I be able to save part of the bankstick? Or the whole? Or corrupt it completely? *intoxicated sob*

There's a remake of the Competition Pro: http://www.protovision-online.de/catalog/product_info.php?products_id=110

Some sounds from the mighty MB6582 (8x8580). Warning, not all of them are traditional leads or arps. collage from old patches I recorderd: No effects expect occasional cutting/looping, reverse and pitch shift from DAW. Even older sounds: http://soundcloud.com/enth/sets/some-random 5 tracks, testing and testing2 uses shitty digital guitar effect pedal and some sounds are from preset bank. Got 4 and a half banks full of weird patches, might record more later if I bother. And I'll share some of the actual patches once I get to cleaning and indexing them... There's even a topic for it but seems pretty empty atm ;) Share your own?

I might be interested :) Attached the four pictures you uploaded to rapidshare.

Seems to be working :) I'll let you know if something comes up.

Yes, in addition Pa2 & Max parameters are also copied to Pa1 when either one is changed (with multible SID engines selected). From what I remember earlier, and from fooling around today, this is the only scenario.

Added instructions to it, and also to the bug in KNOBS menu.

After I reported the problem, I haven't been able to reproduce it. I do remember it wasn't patch specific. Maybe it solved itself :p OMG, it's happening again! If I got 48 in Pa1, and change Min value to 60, I can still use modwheel (knob#1) to modulate pulse width. If I then go to the Pa1 menu, I see 60 there, with PWM on mod-wheel, only when I change the value there (to 59 or 61) it registers. Anyway, I can reproduce it when I have multiple SID engines selected. In other news... When using SPV mode and playing MIDI keyboard (channel 1), the mod wheel nor the pitch bend aren't forwarded to SID engines 2, 3 or 4. Should they? I can always set up the DAW in such way the MIDI events are send to channels 2-4 or visit ENS->INS menu and have every SID engine use channel 1, so it's no biggie. Was just wondering if this is intended behaviour for SPV. Sometimes the "jump to page" function doesen't work, the screen don't get updated (EDIT: lines 2 and 3 specifically). Happens when you go right from OSC ENV menu to MISC menu, and then press LFO select button.

I've broken one... went against my multimeter and "let's see if this works regardless".

Yeah, I got the same issue with ASID XP, muted arp note on few songs. I think I remember this happening before with the build-in SIDPLAY (which is to blame)? Although I don´t remember what I used to play back the .SID file to Midibox or how, so I can´t reproduce it...

Does it play Matt Gray´s Last Ninja II tunes? :D Those perform god-awfully at least with my Midi-interface (the Terratec 88 I mentioned earlier). This version seems much stabler, yes!