pcbatterij

thx for the info olga42, cool beans :rolleyes:

maybe a stupid question but what do you mean with beans? Oh and yes I am still waiting for the ports from Reichelt (including the fuse holders) cheers jef

check out this site: http://www.sequentix.com/cirklon.htm these look very 909 like.

Thx Strophlex, below you can see what parts I found and the two I didn't find at mouser, reichelt or Nikko Electronics. cheers

I have found almost all the "original" parts. Here's a little list where I found them: Rare parts from Reichelt: CA 3080 DIP Op-amp, DIP-8 SC 2603 Transistor 2SC 2603 SC 2878 Transistor 2SC 2878 SA 1115 Transistor 2SA 1115,Si-P,50V,0.2A,0.3 Nikko Electronics Ltd: 2SD 1469R What I didn't find: 1SS133 2SA798

Studying for the last two weeks for an exam yesterday, I didn't have a lot of time to put in the project. But I now have almost all the parts for the 9090. I used the subatomicglue excel file and got most parts at Mouser. The 2sd1469R I had to order from Nikko electronics (wwww.dalbani.co.uk), the rest I ordered from Reichelt.de. If you would ever consider ordering parts in Europe: reichelt is a lot cheaper the Mouser, damn I which I first looked at Reichelt :-( I waited for the PCB's to come in from Trevor, so I could be sure of the correct size of the capacitors. I have now placed the order at Reichelt.de. I have sorted out all the parts that I received from Mouser and Nikko by their values, in such a manner that I can work organized. Yesterday I already started soldering (I know I should wait until I have all the parts, but I couldn't wait). I soldered in all the parts I have for the power and for the bass drum. today I will start with the second board with the cymbal, Hi-hat, MIDI etc parts, because I have not yet tested the power and don't want to waist a complete PCB. fingers crossed that all is ok and I don't burn components of the bass drum section. you can also see on the picture that I haven't soldered the transistors yet, I will not use the BC559 and BC549 from Mouser but the transistors I ordered from Reichelt. I also need another capacitor for C8, because the one I have is to wide to fit in between the resistors left and right of that position. When I get that one from the local shop here, I will also need to buy a male and female connector for the power (J8, J11, J23 and J25) because the males I ordered don't fit the females.... cheers Jef

Hey all, concerning the leds: It might be an idea to use duo leds. This means 1 led with 3 leads that can have the following: off, orange and red. just an idea. cheers Jef

Hey all, I am starting this blog so everybody can follow how I am doing with the MB9090 project. This can also be a place on this great site where people can find answers if they would like to do the same thing or post comments. I should also mention that I am not an electronics expert at all, I have only made a few small things before I started building a xoxbox. The xoxbox is now working....great machine. I have read through files here and gone through other websites and would like to thank the people behind these sites: http://members.multimania.nl/diy9090/frames.htm http://uk.groups.yahoo.com/group/introspectiv/ http://live.partlist.org/815/project/item/null# http://members.multimania.nl/diy9090/frames.htm http://www.eight-oh-eight.org/ http://www.subatomicglue.com/9090l0g/ In a first stage I will make the 9090, afterwards I will make a MB808 like sequencer (hopefully I can make a MB Seq v4 kind). I have now ordered most parts from Mouser, Reichelt and Nikko electronics and of course the PCB's from Trevor. As soon as I have all the parts I will let you know more. Kind regards Jef

Thx for the replies guys. Once I get all the stuff, I'll probably be back with a few questions :-) Already downloaded the zip. thx Jef

Hey, I read a lot of topics and messages on the forum about people that started a MB 9090 projector would like to start one and a few about a standalone sequencer from the MB808. But I have never seen a picture or PCB layout and/or wiring from a finished project. If someone already finished a project like this, would you like to share pictures? Kind regards, Jef

Great news. Do you already have PCB's available? Kind regards Jef

YES I AM INTERESTED!!!!