Schrabikus
-
Posts
270 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Blogs
Gallery
Everything posted by Schrabikus
-
From the album: Schrabikus Midibox progress
-
I had a similar problem. I've replaced 24LC512 with 24LC256. Formatting was passed with few reboots. When i try to batch upload patches it cause reboot, so i've uploaded patches one by one. Now it works.
-
Eagle files if someone wants to modify it. -
Confirm that DIN module is working, DOUT seems to work too.
-
DIN PCB positive i have forgot that not everyone has the Illustrator :rolleyes:
-
DIN PCB
-
From the album: Schrabikus Midibox progress
-
From the album: Schrabikus Midibox progress
-
DOUT PCB. Positive and negative versions, but not tested yet. -
From the album: Schrabikus Midibox progress
-
From the album: Schrabikus Midibox progress
SMD DIN PCB<br />54 holes :whistle: -
DRN110 006/26 BLK looks good for encoders. I need about 150 with 6mm D-shaft
-
You can use Wood's metal (50% bismuth, 25–28% lead and 22–25% tin) instead. Its melting point is lower than Rose`s I`ve bought it at local radio store. -
And video showing the cleaning process.
-
Boiling in water with citric acid and Rose's metal :sorcerer: is the video showing the process (unfortunately in russian, but it`s quite descriptive) All you need is citric acid (works with acetic too), Rose`s metal and cotton swab or wiping blade for cleaning redundant tin from plate.
-
From the album: Schrabikus Midibox progress
-
From the album: Schrabikus Midibox progress
-
From the album: Schrabikus Midibox progress
PSU taken from broken DVD player (bipolar 12v + 5v) -
From the album: Schrabikus Midibox progress
-
From the album: Schrabikus Midibox progress
-
The final touches is to calibrate AOUT_LC (which strongly does not want to calibrate) for controlling MS-10, replace microSD adapter with real SD slot and faster SD card, and the main dilemma: matrix wiring (which i have to deal with and resolder all the wires) or etching and soldering additional DOUTS/DINS. :getlost: -
Yeah, the software is pure magic! I have just calculated hardware parts total - it`s slightly less than $150 :sorcerer:
-
From the album: Schrabikus Midibox progress
The final step is to make matrix wiring like in Wilba`s MBSEQ for control surface and leds. Now the bottom line of buttons not used.<br />Vacant DOUT and DIN modules will be used in MBFM, which is next. -
From the album: Schrabikus Midibox progress
-
From the album: Schrabikus Midibox progress
20 hours later
